Abstract:Two kinds of spinel structure lithium manganese oxides obtained by a melt-impregnation method were examined in a lithium nonaqueous cell. The first type shows a voltage profile of a typical spinel electrode with the characteristic two-step process, which delivers a larger capacity, but fading capacity on cycling (type I). The other type delivers a slightly lower capacity and has ideal rechargeability with a quasi-one-step process (type II). The mechanism of the lithium ion insertion into the spinel compound was studied by several physical and chemical methods (differential chronopotentiometric curves, cyclic voltammetry, and open-circuit voltage measurement). X-ray diffraction was also used to investigate the structural changes for both types of compounds at different oxidation depths at first charge. The results show that a two-phase reaction (cubic a(0) = 8.154 Angstrom and a(0) = 8.072 Angstrom) occurred in the range of 0.1 < x < 0.45, and a one-phase reaction [cubic a(0) = 8.163 to 8.247 Angstrom] occurred in the range of 0.45 < x < 1.0 for the first charge for the type I spinel. A one-phase reaction (cubic a(0) = 8.105 to 8.223 Angstrom) was observed over the entire intercalated range of 0.25 < x < 1.04 for the type II spinel compound. The capacity fading on cycling for the type I spinel occurs only in the range of 0.1 < x < 0.45, where the shape of the charge and discharge curves in this range was gradually changed to an S-shape from and L-shape during cycling. This is attributed to the fact that the two-phase structure is transformed to more stable one-phase structure.

Studies of spinel LiCrxMn2−xO4 for secondary lithium battery

The study of quaternary spinel phase Li-M-Mn-O (M = Ni, Cr, Mo, V) cathode

Studies of Spinal Li 1+x Mn 2-X O 4 Rechargeable Lithium Ion Battery

Electrochemical Studies of Substituted Spinel LiAlyMn2−yO4−zFz for Lithium Secondary Batteries

Synthesis and Electrochemical Properties of Li[Mn1/3-x/3 Ni1/3-x/3 Co1/3-x/3 Crx ]O2 As Cathode Materials for Lithium-ion Secondary Batteries

Probing Reversible Multielectron Transfer and Structure Evolution of Li1.2Cr0.4Mn0.4O2 Cathode Material for Li-Ion Batteries in a Voltage Range of 1.0–4.8 V

Electrochemical and ex situ XRD studies of a LiMn1.5Ni0.5O4 high-voltage cathode material

Synthesis and Electrochemical Characterization of Li1.05RExCryMn2−x−yO4 Spinel As Cathode Material for Rechargeable Li-battery

Strengthening Reversibility at High Rate of Spinel LiMn2O4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Strengthening Reversibility at High Rate of Spinel LiMn 2 O 4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Dependence of Battery Performance of Spinel Li{sub 1+x}mn{sub 2}o{sub 4} on the Preparation Method

Electrochemical performance of rare-earth doped LiMn2O4 spinel cathode materials for Li-ion rechargeable battery

An Investigation of Lithium Ion Insertion into Spinel Structure Li-Mn-O Compounds

Structure and electrochemical properties of LiMgxMn2-xO4 cathode materials for Li-ion batteries

Thin films of lithium manganese oxide spinel as cathode materials for secondary lithium batteries

Studies on LiMnO spinel system (obtained from melt-impregnation method) as a cathode for 4 V lithium batteries Part II. Optimum spinel from γ-MnOOH

Electrochemical Properties of Spinel LiMn2O4-δFδ for Cathode Materials of Secondary Lithium-ion Battery

Studies on the performance of LiMnxCo1-xO2 synthesized by doping LiCoO2 with Mn for the Li-ion battery

Correlating Cycle Performance Improvement and Structural Alleviation in LiMn2-xMxO4 Spinel Cathode Materials: A Systematic Study on the Effects of Metal-Ion Doping

Synthesis and electrochemical characterization of multi-cations doped spinel LiMn2O4 used for lithium ion batteries

Studies of Cycleability of Limn2o4 and Lila0.01mn1.99o4 As Cathode Materials for Li-Ion Battery