Abstract:Spinel LiMgxMn2-xO4 cathode materials were synthesised using a hydrothermal method, with the effects of doping Mg on the structure and electrochemical performance of LiMn2O4 subsequently investigated. It was found that no other hybrid phases existed in the LiMgxMn2-xO4 and that doped Mg cannot change the spinel lattice type of LiMn2O4. An appropriate Mg content was beneficial for improving the crystallinity and particle uniformity of the samples. The electrochemical performance of the LiMgxMn2−xO4 was assessed in the 2.9~4.3 V range, with the specific discharge capacity of the LiMn2O4 potentially reaching 139.9 mAh g−1 at 0.2 C, with a capacity retention rate of 63.76% after 100 cycles. Furthermore, the LiMn1.97Mg0.03O4 demonstrated an excellent cycling performance at both room temperature (25°C) and at a high temperature (55°C). At 25°C, the first specific discharge capacity was 124.3 mAh g−1 at 0.2 C, with a capacity retention rate of 94.29% after 100 cycles, while the specific discharge capacity can reach 94.8 mAh g−1 at 5 C and 74.0 mAh g−1 at 10 C. At 55°C, the initial specific discharge capacity was 125.6 mAh g−1 at 0.2 C, with a capacity retention rate of 85.43% after 100 cycles. The cyclic voltammogram curves and electrochemical impedance spectroscopy results indicated that, compared with the pristine LiMn2O4, the LiMn1.97Mg0.03O4 had a larger Li+-ion diffusion coefficient and smaller resistance during the charge–discharge process. Overall, the results indicated that Mg doping is beneficial in improving the electrochemical performance of spinel LiMn2O4.

Studies of Cycleability of Limn2o4 and Lila0.01mn1.99o4 As Cathode Materials for Li-Ion Battery

Strengthening Reversibility at High Rate of Spinel LiMn2O4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Excellent Stability of Spinel Limn2o4-Based Composites for Lithium Ion Batteries

Strengthening Reversibility at High Rate of Spinel LiMn 2 O 4 by Aluminum and Copper Co-doping for Lithium Ion Battery

Electrochemical Performance Ni Doped Spinel LiMn2O4 Cathode for Lithium Ion Batteries

Cycle Life Improvement of Limn2o4 Cathode in Rechargeable Lithium Batteries

Correlating Cycle Performance Improvement and Structural Alleviation in LiMn2-xMxO4 Spinel Cathode Materials: A Systematic Study on the Effects of Metal-Ion Doping

Hydrothermal synthesis of Mg-doped LiMn2O4 spinel cathode materials with high cycling performance for lithium-ion batteries

Synthesis and electrochemical characterization of multi-cations doped spinel LiMn2O4 used for lithium ion batteries

Preparation and performance of Mg-doped spinel-structured LiMn2O4 cathode materials

Preparation and Electrochemical Performance of La-Doped LiMn2-xLaxO4 by Sol-Gel Method

Enhanced low voltage cycling stability of LiMn2O4 cathode by ZnO coating for lithium ion batteries

Synthesis of spinel LiMn2-xGaxO4 and their electrochemical characterisitics

Role of Al-doping with Different Sites Upon the Structure and Electrochemical Performance of Spherical LiNi0.5Mn1.5O4 Cathode Materials for Lithium-Ion Batteries

Structural and electrochemical characterization of LiMn2-2xLixNixO4 (0 <= x <= 0.1) cathode materials

Synthesis and Physicochemical Properties of LiLa0.01Mn1.99O3.99F0.01 Cathode Materials for Lithium Ion Batteries

Preparation of LiMn2O4 Cathode with Excellent Cycling Performance

Structure and Electrochemical Performance of Modificated LiMn<sub>2</sub>O<sub>4</sub> by S-Co Codoping and Nano SiO<sub>2</sub> Surface Coating

Structure and Electrochemical Performance of Modificated LiMn2O4 by S-Co Codoping and Nano SiO2 Surface Coating

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi0.5Mn1.5O4 spinel cathode materials

Doping Mg2+ to Improve the Li+ Diffusion Rate and Electrochemical Performance of Spinel LiMn2O4