Abstract:Lithium-rich manganese-based layered oxides (LRMOs) have recently attracted enormous attention on account of their remarkably big capacity and high working voltage. However, some inevitable inherent drawbacks impede their wide-scale commercial application. Herein, a kind of Cr-containing Co-free LRMO with a topical spinel phase (Li1.2Mn0.54Ni0.13Cr0.13O2) has been put forward. It has been found that the high valence of Cr6+ can reduce the Li+ ion content and induce the formation of a local spinel phase by combining more Li+ ions, which is beneficial to eliminate the phase boundary between the spinel phase and the bulk phase of the LRMO material, thus dramatically avoiding phase separation during the cycling process. In addition, the introduction of Cr can also expand the layer spacing and construct a stronger Cr-O bond compared with Mn-O, which enables to combine the transition metal (TM) slab to prevent the migration of TM ions and the transformation of the bulk phase to the spinel phase. Simultaneously, the synergistic effect of the successfully constructed spinel-layered biphase interface and the strong Cr-O bond can effectively impede the escape of lattice oxygen during the initial activation process of Li2MnO3 and provide the fast diffusion path for Li+ ion transmission, thus further reinforcing the configurable stability. Besides, Cr-LRMO presents an ultrahigh first discharge specific capacity of 310 mAh g-1, an initial Coulombic efficiency of as high as 92.09%, a good cycling stability (a capacity retention of 94.70% after 100 cycles at 1C), and a small voltage decay (3.655 mV per cycle), as well as a good rate capacity (up to 165.88 mAh g-1 at 5C).

Synthesis and Electrochemical Characterization of Li1.05RExCryMn2−x−yO4 Spinel As Cathode Material for Rechargeable Li-battery

Synthesis and Electrochemical Properties of Sc-Doped Li1.05scxmn2-Xo4 Spinel As Cathodic Material for Rechargeable Li-Battery

Electrochemical performance of rare-earth doped LiMn2O4 spinel cathode materials for Li-ion rechargeable battery

Preparation of Submicrocrystal LiMn2O4 Used Mn3O4 As Precursor and Its Electrochemical Performance for Lithium Ion Battery

Synthesis and Electrochemical Characteristics of Li₁.₂(Ni₀.₂Mn₀.₆)ₓ(Co₀.₄Mn₀.₄)y(Ni₀.₄Mn₀.₄)₁₋ₓ₋yO₂ (0 ≤ X + Y ≤ 1) Cathode Materials for Lithium Ion Batteries

Synthesis of rare Earth element doped LiMn1.5Ni0.5O4 as a lithium-ion battery cathode material using sonochemical method

Structure Change of Orthorhombic LiMnO2cathodes During Electrochemical Cycle for Rechargeable Lithium Battery

Electrochemical and ex situ XRD studies of a LiMn1.5Ni0.5O4 high-voltage cathode material

Probing Reversible Multielectron Transfer and Structure Evolution of Li1.2Cr0.4Mn0.4O2 Cathode Material for Li-Ion Batteries in a Voltage Range of 1.0–4.8 V

Synthesis And Electrochemical Properties Of Li1.3nb0.3cr0.4o2 As A High-Capacity Cathode Material For Rechargeable Lithium Batteries

Studies of spinel LiCrxMn2−xO4 for secondary lithium battery

Optimization Of Spinel Li1+Xmn2-Yo4 As A 4 V Li-Cell Cathode In Terms Of A Li-Mn-O Phase Diagram

Correlating Cycle Performance Improvement and Structural Alleviation in LiMn2-xMxO4 Spinel Cathode Materials: A Systematic Study on the Effects of Metal-Ion Doping

Preparation and Electrochemical Performance of Yttrium-doped Li[Li0.20Mn0.534Ni0.133Co0.133]O2 As Cathode Material for Lithium-Ion Batteries

Synthesis and Electrochemical Properties of Li[Mn1/3-x/3 Ni1/3-x/3 Co1/3-x/3 Crx ]O2 As Cathode Materials for Lithium-ion Secondary Batteries

Constructing a Cr-Substituted Co-Free Li-Rich Ternary Cathode with a Spinel-Layered Biphase Interface

Studies of Spinal Li 1+x Mn 2-X O 4 Rechargeable Lithium Ion Battery

Studies on synthesis of cathode material LiMn2O4 for lithium-ion batteries and it's electrochemical performance

Dependence of Battery Performance of Spinel Li{sub 1+x}mn{sub 2}o{sub 4} on the Preparation Method

Boosting the Electrochemical Performance of a Spinel Cathode with the In Situ Transformed Allogenic Li-Rich Layered Phase

Structure Evolution from Layered to Spinel during Synthetic Control and Cycling Process of Fe-Containing Li-Rich Cathode Materials for Lithium-Ion Batteries