Abstract:In this study, the BN-SiC composites were enhanced using individual or composite nano additives (Al2O3, ZrO2) sintered by hot pressing. The phase compositions, microstructure, mechanical properties, and thermal shock resistance of BN-based composites were comparatively investigated. The results showed that: the collaborative addition of nano ZrO2 or Al2O3 stimulated the solid diffusion and promoted the densification behavior. Meanwhile, the BN-SiC composites presented suitable development of BN plates and exhibited excellent structural uniformity due to the nano particles incorporated. As a result, the flexural strengths and fracture toughness of 10 wt% Al2O3 and 10 wt% ZrO2 improved significantly to 355.7 MPa and 5.78 MPa m1/2, respectively. In addition, BN-based composites exhibited excellent thermal shock resistance up to temperature difference (ΔT) = 1200 °C, where no catastrophic failure has been observed for all the specimens except the individual 10 wt% Al2O3 containing specimens. The main enhancing mechanisms were attributable to the “crack deflection”, “crack bridging” and “pulling-out” of BN plates, and the prolonged crack propagation paths along the fine particles.

Fracture Behavior and Toughness of H-Bn/si_3n_4 Ceramic Composites

Mechanical and tribological properties of hot-pressed h-BN/Si3N4 ceramic composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Influence of hBN content on mechanical and tribological properties of Si3N4/BN ceramic composites

Microstructure of hot-pressed h-BN/Si3N4 ceramic composites with Y2O3–Al2O3 sintering additive

Microstructure, mechanical properties and thermal shock behavior of h-BN-SiC ceramic composites prepared by spark plasma sintering

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Fabrication and Mechanical Properties of Boron Nitride Nanotube Reinforced Silicon Nitride Ceramics

Fabrication of High Strength α-SiAlON/BN Composition Ceramics by Hot Pressing

Effects of h-BN addition on microstructures and mechanical properties of β-CaSiO3 bioceramics

Boron Nitride Doped Transparent Polycrystalline Silicon Nitride Ceramics

Anisotropies in structure and properties of hot-press sintered h-BN-MAS composite ceramics: Effects of raw h-BN particle size

Fabrication and Properties of SiO2-BN-Si3N4 Composites

Microstructure and room/elevated-temperature mechanical properties of hot-pressed h-BN composite ceramics with La2O3-Al2O3-SiO2 addition

Microstructural evolution of h-BN matrix composite ceramics with La-Al-Si-O glass phase during hot-pressed sintering

Effects of Additive to Bn Interlayers on Microstructure and Properties of Laminated Si3n4/Bn Ceramics

Analysis of Mechanical Properties of Al2O3‐cBN‐hBN Composites and Identification of Main Influencing Factors

Quantitative In-Situ Study of Strength-Governed Interfacial Failure Between H-Bn and Polymer-Derived Ceramic