Abstract:The thermal, mechanical and corrosive properties of (Cu45Zr45.5Ti9.5)100-x Al x (x = 0–0.25 at%) glass forming alloys were systematically studied. The thermal measurements show that Al microalloying leads to increase of glass transition temperature but decrease of supercooled liquid region. The glass transition activation energy slightly increases and then decreases with increasing Al content. The room-temperature compression tests demonstrate that all studied Cu-based bulk metallic glasses (BMGs) exhibit work-hardening behavior, but the work-hardening capacity depends on Al content. In addition, yield strength, fracture strength and fracture strain are drastically increased by Al addition. The largest plasticity of (Cu45Zr45.5Ti9.5)99.8Al0.2 BMG is 6 times larger than that of the Al-free Cu-based BMG. Moreover, the electrochemical measurements indicate that the Al minor addition cause the decrease of both corrosion potential and corrosion current density. The corrosion behavior gradually transforms from the pitting corrosion to the self-passivization with increasing Al content. The local heterogeneity of Al element is thought to be the reason for the performance change of the studied Cu-based BMGs. The present results would provide a new insight into the mechanism for the microalloying effect on the properties of the metallic glasses.

Effects of Minor Al Addition on the Glass-Forming Ability and Mechanical Properties of Cu-based Bulk Amorphous Alloy

Effects of Minor Additions on Ni- and Be-Free Ti-Based Bulk Glassy Alloys

Effect of Minor Sn Additions on the Formation and Properties of TiCuZrPd Bulk Glassy Alloy

Effect of Ti addition on supercooled liquid region and glass forming ability of bulk amorphous Zr60Cu20Ni10-xAl10Tix alloys

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

Effect of Co Addition on the Glass-Forming Ability and Mechanical Properties of Ti-Zr-Be-Cu-Co Bulk Amorphous Alloys

Effects of minor addition of Al and Ag elements on the atomic structure and mechanical property of ZrCu-based metallic glasses

EFFECT OF Ti ADDITION ON THE GLASS--FORMING ABILITY OF (Zr0.59cu0.18ni0.13al0.10)100-Xtix ALLOYS

Effects of Cr addition on glass-forming ability and mechanical properties of Cu–Zr–Al bulk metallic glass

Effects of Al on Glass-Forming Ability and Thermal Stability of Cu-Based Metallic Glass

Effect of Ag substitution for Ti on glass-forming ability, thermal stability and mechanical properties of Zr-based bulk metallic glasses

Metallographic Analysis of Cu–Zr–Al Bulk Amorphous Alloys with Yttrium Addition

Effect of Ti addition on properties of Zr54Al10.2Ni9.4Cu26.4 glass forming alloy

Effects of Cr addition on glass-forming ability and mechanical properties of C u-Z r-Al bulk metallic glass

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Glass-Forming Ability and Thermal Properties of Al70Fe12.5V12.5X5(X = Zr, Nb, Ni) Amorphous Alloys via Minor Alloying Additions

Glass-Forming Ability and Mechanical Properties of the Ternary Cu-Zr-Al and Quaternary Cu-Zr-Al-Ag Bulk Metallic Glasses

Effect of Sn addition on thermal stability of (Zr52.5Ti5Al10 Ni14.6Cu17.9) Sn-(100-x)(x) alloys

Mechanism of Ag and Al on improving the glass forming ability of CuZr-based alloys

A New Ti–Zr–Hf–Cu–Ni–Si–Sn Bulk Amorphous Alloy with High Glass-Forming Ability

Effect of Ti addition on mechanical properties of Zr-based bulk metallic glasses