Abstract:The effect of composition tuning on glass forming ability (GFA), mechanical properties and atomic structure in ZrxCo84−xAl16 bulk metallic glasses (BMGs) with x = 51–58 has been investigated by using copper-mold suction casting, nanoindentation, high-energy X-ray diffraction, extended X-ray absorption fine structure experiments and ab initio molecular dynamics simulations, respectively. It is found that GFA firstly increases then decreases with increasing Zr content, exhibiting a maximum diameter of 7 mm with the Zr content of 55 and 56, while an abrupt reduction of bending plasticity occurs as the Zr content drops below 55. Both experimental and theoretical results find that GFA is remarkably enhanced, due to the abnormal reduction in the fractions of the Co-centered ⟨0, 2, 8, 1⟩, ⟨0, 3, 6, 2⟩ and ⟨0, 3, 6, 3⟩ polyhedra, and the denser atomic packing of Zr atoms around center Co atom, as the Zr content increases from 51 to 56. Meanwhile, the simultaneously improved plasticity is associated with the increased Co-centered ⟨0, 3, 6, 0⟩, and Al-centered ⟨0, 2, 8, 1⟩ and ⟨0, 3, 6, 2⟩ polyhedra, which provide more fertile sites for the nucleation of shear transformations. Further Zr addition to 58 increases remarkably the fractions of Zr- and Al-centered ⟨0, 1, 10, 2⟩ and ⟨0, 3, 6, 4⟩ polyhedra, and causes looser atomic packing of Co atoms around center Zr atom, leading to the reduction in GFA. However, the plasticity is not enhanced further but remains nearly constant, which may be related to the deteriorated effect on plasticity of the decreased fractions of Zr-centered ⟨0, 1, 10, 5⟩ and Co-centered ⟨0, 3, 6, 0⟩ polyhedra, and the increased fractions of Zr-centered ⟨0, 1, 10, 3⟩ and ⟨0, 2, 8, 4⟩ and Co-centered ⟨0, 2, 8, 0⟩ polyhedra. Compositional tuning, with internal structure tuned to favor both GFA and plastic flow, offers new possibilities in developing ductile BMG materials.

Effects of minor addition of Al and Ag elements on the atomic structure and mechanical property of ZrCu-based metallic glasses

On the atomic structure of Zr–Ni and Zr–Ni–Al metallic glasses

Mechanism of Ag and Al on improving the glass forming ability of CuZr-based alloys

The Correlation among the Atomic Structure, Electronic Valence Band and Properties of Zr-Cu-Al-Ag Bulk Metallic Glasses

The characterisation of atomic structure and glass-forming ability of the Zr–Cu–Co metallic glasses studied by molecular dynamics simulations

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

Molecular dynamics simulation of minor Zr addition on short and medium-range orders of Cu-Zr metallic glass

Effect of Ag substitution for Ti on glass-forming ability, thermal stability and mechanical properties of Zr-based bulk metallic glasses

Effects of Cr and Zr additions on the microstructure and properties of Cu-6wt.% Ag alloys

Effect of Al Composition Tuning on Properties and Structure in Zr-Co-Al Metallic Glass

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Effects of Zr and Mg alloying on microstructure and properties of Cu-Cr-Si alloys

Effect of Fe addition on the glass-forming ability, stability, and mechanical properties of Zr50Cu34-xFexAl8Ag8 metallic glasses

Effects of minor alloying on the mechanical properties of Al based metallic glasses

Atomic Structure in Al-Doped Multicomponent Bulk Metallic Glass

Atomic-scale mechanisms of the glass-forming ability in metallic glasses

Effects of Al on Glass-Forming Ability and Thermal Stability of Cu-Based Metallic Glass

An atomic-scale insight into the effects of hydrogen microalloying on the glass-forming ability and ductility of Zr-based bulk metallic glasses

Atomic Structure and Glass Forming Ability of Cu46zr46al8 Bulk Metallic Glass

Glass forming ability and bending plasticity evolutions in Zr-Co-Al bulk metallic glasses and their structural origin

Effect of Ti addition on mechanical properties of Zr-based bulk metallic glasses