Abstract:(Cu50Zr50)(x)(Cu73Ti27)(100-x) (x = 0.63-0.75 at.%) alloys are designed using the proportional mixing of Cu(50)Zr(50 )and Cu73Ti27 binary alloys. Their thermal, mechanical and corrosive properties as well as the glass forming ability (GFA) are systematically investigated. The results show that the studied Cu-based glass forming alloys are bulk metallic glass composites (BMGCs) with off-eutectic compositions and display work-hardening behavior. The glass transition temperature and the reduced glass transition temperature increase and then decrease with increasing x when x >= 0.74 atop, while on the contrary for the critical cooling rate and supercooled liquid region. Both yield strength and fracture strength firstly increase and then decrease with decreasing x when x <= 0.71 at%. The plastic strain of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGC is the largest among the studied Cu-based BMGCs. Potentiodynamic polarization measurements show that all studied BMGCs exhibit a step-like anodic polarization behavior, indicating two competitive procedures of pitting corrosion and self-passivization. The corrosion behavior gradually transforms from predominant self-passivization to the pitting corrosion with decreasing x. Both corrosion current density and onset passive current density of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGCs are two orders of magnitude lower than those of the other Cu-based BMGCs. The mechanisms for the GFA and the corrosion are also discussed. The present work would shed light on how to design and develop BMGCs with superior comprehensive performances.

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

Ti Microalloying Effect on Corrosion Resistance and Thermal Stability of CuZr-based Bulk Metallic Glasses

Effect of Al Addition on Glass Forming Ability of Cu-Based Bulk Metallic Glasses

Fe–C micro-alloying effect on properties of Zr53Al11.6Ni11.7Cu23.7 bulk metallic glass

Effect of Fe-C Alloy Additions on Properties of Cu-Zr-Ti Metallic Glasses

The effect of microalloying on thermal stability and corrosion resistance of Cu-based bulk metallic glasses

The Effect of Microalloying on Mechanical Properties in CuZrAl Bulk Metallic Glass

Effects of Al on Glass-Forming Ability and Thermal Stability of Cu-Based Metallic Glass

Effects of Minor Alloying Additions on Glass Forming Ability and Mechanical Properties of Cu-Zr-Al Bulk Metallic Glasses

Effects of Cr addition on glass-forming ability and mechanical properties of Cu–Zr–Al bulk metallic glass

Research on High-Al Cu-Zr-Al-Y Bulk Metallic Glass and Its Composites

Effects of Ni addition on the glass-forming ability, mechanical properties and corrosion resistance of Zr–Cu–Al bulk metallic glasses

The effect of Al content on Ti/Zr-based bulk metallic glass composite by additive manufacturing

Composition Design and Properties of Cu–Zr–Ti Bulk Metallic Glass Composites

Glass Forming Ability and Corrosion Resistance of Zr-Cu- Ni-Al-Ag Bulk Metallic Glass

Effects of Cr addition on glass-forming ability and mechanical properties of C u-Z r-Al bulk metallic glass

Cu-Zr-Al-Ti bulk metallic glass with enhanced glass-forming ability, mechanical properties, corrosion resistance and biocompatibility

Effects of Cu,Fe and Co addition on the glass-forming ability and mechanical properties of Zr-Al-Ni bulk metallic glasses

Glass-Forming Ability and Mechanical Properties of the Ternary Cu-Zr-Al and Quaternary Cu-Zr-Al-Ag Bulk Metallic Glasses

Enhanced Plasticity of a Zr50Cu48Al2 Bulk Metallic Glass

Effects of minor addition of Al and Ag elements on the atomic structure and mechanical property of ZrCu-based metallic glasses