Abstract:A new ultrahigh vacuum microcalorimeter for measuring heats of adsorption and adsorption-induced surface reactions on complex single crystal-based model surfaces is described. It has been specifically designed to study the interaction of gaseous molecules with well-defined model catalysts consisting of metal nanoparticles supported on single crystal surfaces or epitaxial thin oxide films grown on single crystals. The detection principle is based on the previously described measurement of the temperature rise upon adsorption of gaseous molecules by use of a pyroelectric polymer ribbon, which is brought into mechanical∕thermal contact with the back side of the thin single crystal. The instrument includes (i) a preparation chamber providing the required equipment to prepare supported model catalysts involving well-defined nanoparticles on clean single crystal surfaces and to characterize them using surface analysis techniques and in situ reflectivity measurements and (ii) the adsorption∕reaction chamber containing a molecular beam, a pyroelectric heat detector, and calibration tools for determining the absolute reactant fluxes and adsorption heats. The molecular beam is produced by a differentially pumped source based on a multichannel array capable of providing variable fluxes of both high and low vapor pressure gaseous molecules in the range of 0.005-1.5 × 10(15) molecules cm(-2) s(-1) and is modulated by means of the computer-controlled chopper with the shortest pulse length of 150 ms. The calorimetric measurements of adsorption and reaction heats can be performed in a broad temperature range from 100 to 300 K. A novel vibrational isolation method for the pyroelectric detector is introduced for the reduction of acoustic noise. The detector shows a pulse-to-pulse standard deviation ≤15 nJ when heat pulses in the range of 190-3600 nJ are applied to the sample surface with a chopped laser. Particularly for CO adsorption on Pt(111), the energy input of 15 nJ (or 120 nJ cm(-2)) corresponds to the detection limit for adsorption of less than 1.5 × 10(12) CO molecules cm(-2) or less than 0.1% of the monolayer coverage (with respect to the 1.5 × 10(15) surface Pt atoms cm(-2)). The absolute accuracy in energy is within ∼7%-9%. As a test of the new calorimeter, the adsorption heats of CO on Pt(111) at different temperatures were measured and compared to previously obtained calorimetric data at 300 K.

Employ SGC Technology to Measure the Isosteric Heat of Gas-Solid System

MEASUREMENT OF HEAT SINK FOR ENDOTHERMIC FUELS

Apparatus for isochoric specific heat capacity measurement

Non-Silicon MEMS Calorimetric Gas Flow Sensor

A Microcalorimetric Device for Measurement of Differential Heat of Adsorption on Surface of Solid Catalysts

Estimation of isosteric heat of adsorption from generalized Langmuir isotherm

An improved single crystal adsorption calorimeter for determining gas adsorption and reaction energies on complex model catalysts

Accurate Measurement of the Isothermal Heat of Capillary Condensation in Nanopores Using Differential Scanning Calorimetry and Adsorption/Desorption Experiments

Study on Gasifier High Temperature Measurement Method Based on Heat Conduction

On-line Measurement of Isobaric Specific Heat Capacity for Endothermic Hydrocarbon Fuel at High Temperature

A Thin Film Approach to Rapid, Quantitative Measurements of Mixed-Gas Adsorption Equilibrium in Nanoporous Materials

Measurement of liquid′s specific heat capacity using changeable volume calorimeter

Gas and solid phase temperature measurements of porous media combustion

Temperature-corrected Spectroscopic Evaluation Method for Gas Concentration Monitoring

A Flow-Pulse Adsorption-Microcalorimetry System for Studies of Adsorption Processes on Powder Catalysts.

Experimental evaluation of Adsorption Heat for Water vapour/Silica gel pair for chiller application

Adsorption calorimetry: a comparison between experimental measurements and theoretical modeling using gas MOFs

Adsorptive microcalorimeter and its volume calibration

Design and implementation of automatic isoperibol calorimeter based on USB interface

Theoretical development on the isosteric heat of adsorption and experimental confirmation

Adiabatic Calorimeter for Isochoric Specific Heat Capacity Measurements and Experimental Data of Compressed Liquid R1234yf