Abstract:Three kinds of lithium chloride desiccants were selected, which are considered to be potential and interesting working fluids for a desiccant/dehumidification or absorption refrigeration system, and their isobaric specific heat capacities were determined in this context. Experiments were conducted at a high accuracy twin-cell scanning calorimeter. The temperature accuracy and heat flux resolution of the calorimeter are +/- 0.05 K and 0.1 mu W respectively. The data of lithium chloride + water and lithium chloride + triethylene glycol (TEG)/propylene glycol (PG) + water systems were achieved at temperatures from 308.15 K to 343.15 K and atmospheric pressure. The mass fraction of LiCl ranged from 15% to 45% in the LiCl + H2O system, and the mass fraction of LiCl and glycol ranged from 10% to 23.3% and 20% to 46.7% in the ternary systems respectively. Based on the experimental heat capacity data, a universal empirical formula was correlated as a function of temperature and solute mass fraction. In the experimental mass fractions and temperatures range, the average absolute deviation (AAD) between experiment results and calculated values is no more than 0.15%, and maximum absolute deviation (MAD) is within 0.38%. These thermodynamic data of lithium chloride solutions can be effectively used for analysis and design of desiccant/dehumidification systems and absorption refrigeration systems in both refrigeration and chemical industry. (C) 2013 Elsevier Ltd. All rights reserved.

Adiabatic Calorimeter for Isochoric Specific Heat Capacity Measurements and Experimental Data of Compressed Liquid R1234yf

Measurements of the isobaric heat capacity of R1234yf in liquid phase at temperatures from 305 K to 355 K and pressures up to 5 MPa

Measurements of the Isobaric Heat Capacity of Pressurized Liquid Trans-1,3,3,3-tetrafluoropropene [r1234ze(e)] by Scanning Calorimetry

Measurements of Isobaric Heat Capacity of R143a and R227ea at Liquid Phase by Quasi-Steady Scanning

Apparatus for isochoric specific heat capacity measurement

Isobaric Heat Capacity Measurements for Dimethyl Ether and 1,1-Difluoroethane in the Liquid Phase at Temperatures from 305 K to 365 K and Pressures Up to 5 Mpa

Measurement of the Heat Capacity of R1233zd(E)

Isobaric Heat Capacity Measurements for R1234yf from 303 to 373 K and Pressures Up to 12 Mpa

Isobaric Heat Capacity of Potential Liquid Desiccant Solutions Containing Calcium Chloride and Its Mixtures

Isobaric Heat Capacity of HFC-161 in the Liquid Phase at Temperatures Up to 360.15 K and Pressures Up to 5.5 MPa

Measurement of Saturated Vapor Pressure and Compressed Liquid Density for 1,1,1,3,3,3-Hexafluoroisopropylmethyl Ether

Isobaric Heat Capacities of R245fa and R236fa in Liquid Phase at Temperatures from (315 to 365) K and Pressures Up to 5.5 MPa

Thermodynamic Properties of (r1234yf + R290): Isochoric Pρtx and Specific Heat Capacity C Measurements and an Equation of State

Measurements of Isochoric Specific Heat Capacity for 3,3,3-Trifluoroprop-1-ene (r1243zf) at Temperatures from (250 to 300) K and Pressures Up to 10 MPa

The isochoric special heat capacity for 3,3,3-trifluoroprop-1-ene (R1243zf) at temperatures from (299 to 351) K and pressures up to 11 MPa

Measurement of liquid′s specific heat capacity using changeable volume calorimeter

Compressed Liquid Densities of Binary Mixtures of Difluoromethane (R32) and 2,3,3,3-Tetrafluoroprop-1-ene (r1234yf) at Temperatures from (283 to 363) K and Pressures Up to 100 MPa

Isobaric Specific Heat Capacity of Typical Lithium Chloride Liquid Desiccants Using Scanning Calorimetry

Measurements of Ptx and Specific Heat Capacity Cv for (r290+r1243zf) Binary Mixtures at Temperatures from (292 to 350) K and Pressures Up to 11 MPa

A small sample-size automated adiabatic calorimeter from 70 to 580 K

Measurements of Bubble Point Pressure and Saturated Liquid Density for ((R1234yf+r290))