Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Metal/Organic Interfaces: Efficient Charge Injection in Organic Field-Effect Transistors Enabled by Low-Temperature Atomic Layer Deposition of Ultrathin VOx Interlayer (adv. Funct. Mater. 25/2016)

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

On Practical Charge Injection at the Metal/Organic Semiconductor Interface

Chemically Driven Interfacial Coupling in Charge-Transfer Mediated Functional Superstructures.

Onset Voltage Shift in the Organic Thin-Film Transistor with an Atomic-Layer-deposited Charge-Injection Interlayer

Reduction of charge injection barrier by 1-nm contact oxide interlayer in organic field effect transistors

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Editorial: High-Performance Organic Thin-Film Transistors

Aqueous Solution‐Processed Vanadium Oxide for Efficient Hole Injection Interfacial Layer in Organic Light‐Emitting Diode

In Situ and Ex Situ Investigation of the Organic-Organic Interface Effect

Van Der Waals Metal-Semiconductor Contacts for High-Performance Polymer Field-Effect Transistors

On the Nature of Charge-Injecting Contacts in Organic Field-Effect Transistors

Charge Transport: Precise Control of Interfacial Charge Transport for Building Functional Optoelectronic Devices (adv. Mater. Technol. 5/2019)

Interfacial Flat-Lying Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors

Dramatically Improved Electron Transport Performance by a Deep Triangular Potential Well in Organic Field-Effect Transistors

Interface Engineering of Semiconductor/Dielectric Heterojunctions Toward Functional Organic Thin-Film Transistors

Engineering the Metal–organic Interface by Transferring a High-Quality Single Layer Graphene on Top of Organic Materials

UV-directly Patternable Organic–inorganic Hybrid Composite Dielectrics for Organic Thin-Film Transistors

Dopant/Semiconductor/Electret Trilayer Architecture for High‐Performance Organic Field‐Effect Transistors

Semiconductor/dielectric Interface in Organic Field-Effect Transistors: Charge Transport, Interfacial Effects, and Perspectives with 2D Molecular Crystals

High Performance Organic Field-Effect Transistor with Oxide/Metal Bilayer Electrodes