Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Van Der Waals Metal-Semiconductor Contacts for High-Performance Polymer Field-Effect Transistors

A Transfer Method for High‐Mobility, Bias‐Stable, and Flexible Organic Field‐Effect Transistors

Directly Patterning Conductive Polymer Electrodes on Organic Semiconductor via In Situ Polymerization in Microchannels for High-Performance Organic Transistors

Improving Charge Injection for Organic Field‐Effect Transistor Array via Chemical Functionalized Van der Waals Top‐Contacts

Editorial: High-Performance Organic Thin-Film Transistors

Interfacial Engineering for High-Performance DPPT-TT Polymer Transistors with the On/Off Ratio of 108 and Mobility of 3 Cm2v−1s−1

Lowering the Contact Barriers of 2D Organic F 16 CuPc Field‐Effect Transistors by Introducing Van der Waals Contacts

A simple and robust approach to reducing contact resistance in organic transistors

Noncovalent semiconducting polymer monolayers for high-performance field-effect transistors

High-Yield, Scaling-Up Fabrication of Fermi-Level-Pinning-Free Organic Thin-Film Transistor Arrays with Printed Van der Waals Contacts

Suppressing off -state current via molecular orientation in submicrometer polymer field-effect transistors

A Stable Solution-Processed Polymer Semiconductor with Record High-Mobility for Printed Transistors

Modulating Contact Properties by Molecular Layers in Organic Thin‐film Transistors

Ultralow contact resistance in organic transistors via orbital hybridization

Wafer‐Scale Fabrication of High‐Performance N‐type Polymer Monolayer Transistors Using a Multi‐Level Self‐Assembly Strategy

Designing Contact Independent High‐Performance Low‐Cost Flexible Electronics

An Improved Process for Fabricating High-Mobility Organic Molecular Crystal Field-Effect Transistors

Wafer-scale and universal van der Waals metal semiconductor contact

Enabling Gate Dielectric Design for All Solution-Processed, High-Performance, Flexible Organic Thin-Film Transistors.

Contact Resistance in Organic Field‐Effect Transistors: Conquering the Barrier