Abstract:Simple and low cost vanadyl oxalate (VOC2O4) has been identified as efficient hole transporting layer (HTL) in organic solar cells to facilitate high efficiency and stability. The robust VOC2O4 HTL can be fabricated with wide conditions, especially annealing at 200 °C and treated with UV‐ozone affording a top efficiency of 18.94% with a fill factor of 80% in binary OSCs. Organic solar cells (OSCs) with the conventional configuration usually use polyethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS) as the hole‐transporting layer (HTL); however, its acidity tends to affect the performance and long‐term stability of the devices. Therefore, replacing PEDOT:PSS with other more stable HTLs is essential for realizing the practical applications of OSCs. To achieve this goal, a simple and low‐cost vanadyl oxalate (VOC2O4) is identified as a HTL to facilitate high power conversion efficiencies (PCEs), good stability, and high thickness tolerance to be achieved in OSCs. The VOC2O4 thin film can be easily prepared by spin‐coating from its aqueous solution onto ITO/glass substrate and thermally annealed at 100 °C to exhibit high transmittance, conductivity, and work function. It can be applied as a robust HTL with wide processing conditions, especially after being heated at 200 °C and treated with UV‐ozone (UVO) to afford a very high PCE of 18.94% in OSCs. This value is among the highest PCEs obtained for binary OSCs. In addition, the derived OSCs exhibit high thickness tolerance and better stability than those based on PEDOT:PSS as HTL. These results reveal that VOC2O4 is an excellent HTL for OSCs, having great potential for large‐area device applications.

Low-Temperature Solution-Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole-Transport Layer in Organic Electronics

Efficient Hole Transport Layers With Widely Tunable Work Function For Deep Homo Level Organic Solar Cells

Annealing-Insensitive, Alcohol-Processed MoO x Hole Transport Layer for Universally Enabling High-Performance Conventional and Inverted Organic Solar Cells

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

Low-temperature, solution-processed hole selective layers for polymer solar cells.

MoO x and V 2 O x as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices

Band offset of vanadium-doped molybdenum oxide hole transport layer in organic photovoltaics

Discoloration Effect and One-Step Synthesis of Hydrogen Tungsten and Molybdenum Bronze (hxmo3) Using Liquid Metal at Room Temperature

Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics

Facile solution-processed molybdenum oxide as hole transporting material for efficient organic solar cell

Synthesis of Highly Monodisperse Cu2O Nanocrystals and Their Applications as Hole-Transporting Layers in Solution-Processed Light-Emitting Diodes.

Solution-processed vanadium oxide by low-temperature annealing for silicon solar cells with hole selective contact

Simple and Low‐Cost Vanadyl Oxalate as Hole Transporting Layer Enables Efficient Organic Solar Cells

Solution-processed and thickness-insensitive hole transport layer for high efficiency organic solar cells

Synthesis of atomically thin alloyed molybdenum-tungsten disulfides thin films as hole transport layers in organic light-emitting diodes

Aqueous Solution‐Processed Vanadium Oxide for Efficient Hole Injection Interfacial Layer in Organic Light‐Emitting Diode

Low-temperature MoO3 film from a facile synthetic route for an efficient anode interfacial layer in organic optoelectronic devices

Low Temperature Fabrication of High-Performance VO2 Film Via Embedding Low Vanadium Buffer Layer

Metal/Organic Interfaces: Efficient Charge Injection in Organic Field-Effect Transistors Enabled by Low-Temperature Atomic Layer Deposition of Ultrathin VOx Interlayer (adv. Funct. Mater. 25/2016)

Controllable synthesis and n-doping of HMoOx nanoparticle inks through simple photoreduction for solution-processed organic photovoltaics