Abstract:Simple and low cost vanadyl oxalate (VOC2O4) has been identified as efficient hole transporting layer (HTL) in organic solar cells to facilitate high efficiency and stability. The robust VOC2O4 HTL can be fabricated with wide conditions, especially annealing at 200 °C and treated with UV‐ozone affording a top efficiency of 18.94% with a fill factor of 80% in binary OSCs. Organic solar cells (OSCs) with the conventional configuration usually use polyethylenedioxythiophene:polystyrene sulfonate (PEDOT:PSS) as the hole‐transporting layer (HTL); however, its acidity tends to affect the performance and long‐term stability of the devices. Therefore, replacing PEDOT:PSS with other more stable HTLs is essential for realizing the practical applications of OSCs. To achieve this goal, a simple and low‐cost vanadyl oxalate (VOC2O4) is identified as a HTL to facilitate high power conversion efficiencies (PCEs), good stability, and high thickness tolerance to be achieved in OSCs. The VOC2O4 thin film can be easily prepared by spin‐coating from its aqueous solution onto ITO/glass substrate and thermally annealed at 100 °C to exhibit high transmittance, conductivity, and work function. It can be applied as a robust HTL with wide processing conditions, especially after being heated at 200 °C and treated with UV‐ozone (UVO) to afford a very high PCE of 18.94% in OSCs. This value is among the highest PCEs obtained for binary OSCs. In addition, the derived OSCs exhibit high thickness tolerance and better stability than those based on PEDOT:PSS as HTL. These results reveal that VOC2O4 is an excellent HTL for OSCs, having great potential for large‐area device applications.

Annealing-Insensitive, Alcohol-Processed MoO x Hole Transport Layer for Universally Enabling High-Performance Conventional and Inverted Organic Solar Cells

Efficient Hole Transport Layers With Widely Tunable Work Function For Deep Homo Level Organic Solar Cells

Annealing-free alcohol-processable MoO anode interlayer enables efficient light utilization in organic photovoltaics

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

Solution-processed and thickness-insensitive hole transport layer for high efficiency organic solar cells

Facile solution-processed molybdenum oxide as hole transporting material for efficient organic solar cell

Controllable synthesis and n-doping of HMoOx nanoparticle inks through simple photoreduction for solution-processed organic photovoltaics

Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells

Efficient non-fullerene organic solar cells employing aqueous solution-processed MoO3 as a hole-transporting layer

Efficient and stable organic solar cells based on all-solution-processed metal oxide transport layers

Undoped MoO X with Oxygen-rich Vacancies as Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells

MoOx Hole Collection Layer for A-Si: H Based Photovoltaic Cells

Molybdenum oxide hole selective transport layer by hot wire oxidation-sublimation deposition for silicon heterojunction solar cells

MoO x and V 2 O x as hole and electron transport layers through functionalized intercalation in normal and inverted organic optoelectronic devices

Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics

Low-Temperature Solution-Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole-Transport Layer in Organic Electronics

Simple and Low‐Cost Vanadyl Oxalate as Hole Transporting Layer Enables Efficient Organic Solar Cells

Improved efficiency of organic solar cell using MoS2 doped poly(3,4-ethylenedioxythiophene)(PEDOT) as hole transport layer

Solution-Processable NiOx:PMMA Hole Transport Layer for Efficient and Stable Inverted Organic Solar Cells