Abstract:An experimental investigation to verify the suitability of MoOx as the hole collection layer for a-Si:H based thin film photovoltaic cell is carried out. The photovoltaic cell investigated has the structure of MoOx (hole collection layer) / intrinsic a-Si:H (photoactive layer) / phosphorus doped a-Si:H (electron collection layer) / Ag (back reflector electrode); all deposited in that order onto an Asahi glass (type U) substrate, which is also acting as the transparent front electrode for the cell. The effects of different post deposition annealing temperatures are investigated. The highest efficiency values are obtained for the cells annealed at 120oC. For the photovoltaic cell with 100 nm thick photoactive layer, the highest efficiency is measured to be 6.46 % with an open current voltage (Voc) of 827 mV and a short current density of (Jsc) of 10.44 mA/cm2. For the photovoltaic cell with 300 nm thick photoactive layer, the highest efficiency is measured to be 7.93 % with Voc of 818 mV and Jsc of 13.24 mA/cm2. The efficiency measurements are carried out under AM1.5 test conditions. Jsc values are corrected according to the external quantum efficiency measurements of the cells in the AM1.5 photovoltaic spectrum region between 270 nm and 800 nm. Compared to the reference cell with boron doped μ-SiOx layer acting as the hole collection layer, the cell with MoOx hole collection layer has similar FF, lower Voc, higher Jsc for wavelength up to the green light region of the AM1.5 spectrum and lower Jsc for the longer wavelengths.

Low-temperature, solution-processed molybdenum oxide hole-collection layer for organic photovoltaics

MoOx Hole Collection Layer for A-Si: H Based Photovoltaic Cells

Solution-processed Molybdenum Oxide Hole Transport Layer Stabilizes Organic Solar Cells

Efficient Hole Transport Layers With Widely Tunable Work Function For Deep Homo Level Organic Solar Cells

Facile solution-processed molybdenum oxide as hole transporting material for efficient organic solar cell

Annealing-free alcohol-processable MoO anode interlayer enables efficient light utilization in organic photovoltaics

Efficient non-fullerene organic solar cells employing aqueous solution-processed MoO3 as a hole-transporting layer

Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells

Annealing-Insensitive, Alcohol-Processed MoO x Hole Transport Layer for Universally Enabling High-Performance Conventional and Inverted Organic Solar Cells

Optimal hole extraction performance in MoOx-incorporated PEDOT:PSS films for organic photovoltaics

Solution-processed and thickness-insensitive hole transport layer for high efficiency organic solar cells

Undoped MoO X with Oxygen-rich Vacancies as Hole Transport Material for Efficient Indoor/Outdoor Organic Solar Cells

Solution preparation of molybdenum oxide on graphene: a hole transport layer for efficient perovskite solar cells with a 1.12 V high open-circuit voltage

A simple synthesis method to prepare a molybdenum oxide hole-transporting layer for efficient polymer solar cells

High-Work-Function Molybdenum Oxide Hole Extraction Contacts in Hybrid Organic–Inorganic Perovskite Solar Cells

Band offset of vanadium-doped molybdenum oxide hole transport layer in organic photovoltaics

Molybdenum Oxide Particles Doped in Hole Transport Layer to Enhance the Efficiency of Flexible Polymer Solar Cells

Prospects of e-beam evaporated molybdenum oxide as a hole transport layer for perovskite solar cells

Solution-Processed Mosx Thin-Films As Hole-Transport Layers for Efficient Polymer Solar Cells