Abstract:Recently, it has been found that the larger surface areas of SiC nanowires have significant effect on the microstructure and performance of composites. The strengthening effect of SiC nanowires is preceded to the traditional micron-scale reinforcements. However, the strengthening behavior and corresponding model of the SiCnw/6061Al composite has not been understood yet. Therefore, in the present work, SiCnw/6061Al composites with different fractions (10, 15 and 20 vol%) have been prepared by pressure infiltration method. The effect of SiC nanowires' amount on the microstructure and the mechanical properties of SiCnw/Al composites has been investigated. The interface between SiC nanowires and Al matrix was well bonded and free of interfacial reaction products regardless of heat treatments. The tensile strength of annealed SiCnw/6061Al composites was increased with the content of SiC nanowires. However, the tensile strength of aged SiCnw/6061Al composite was reached to its maximum at 15 vol%, which should be attributed to the higher porosity of the composites. The yield strength was increased with the content of SiC nanowires, and the strengthening behavior of SiCnw/6061Al composites could be described by the modified shear-lag model. The strengthening factor (the slope of σ cy –V r curves) of SiCnw/6061Al composites is much higher than that of Al composite reinforced with particulates and short whiskers.

THE IN-SITU SEM OBSERVATION OF CRACK PROMGATION OF SiC WHISKERS REINFORCED Al-12Ti COMPOSITES

In-situ SEM observation of crack propagation of SiC whiskers reinforced Al-12Ti composites

In situ transmission electron microscopy observation of the initiation and growth of microcracks in an SiC whiskerAl composite

FRACTURE BEHAVIOUR OF SiC WHISKER REINFORCED Al COMPOSITES

Study on the fracture behavior and toughening mechanism of Si3N4/SiC(n)/SiC(w) nanocomposites

Microstructure of SiC<SUB>w</SUB> reinforced Al–12Ti composites prepared by powder metallurgical technique

Microstructure of SiCwreinforced Al–12Ti composites prepared by powder metallurgical technique

MODELING OF CRACK PROMGATION BEHMIOR IN WHISKER REINFORCED CERAMIC COMPOSITES

The effect of whisker misalignment on the hot compressive deformation behavior of SiCw/6061 Al composites at 500°C

In-situ study of the fracture behavior of SiCf/SiC composite material under three-point bending

Study on Microstructures of Micron Si 3 N 4 Composite Ceramic with Addition of Nano SiC and SiC Whisker

Mechanical properties and fracture behavior of SiCw reinforced Al–12Ti alloy prepared by bechanical alloying technique

Fabrication and characterization of SiC whisker reinforced reaction bonded SiC composite

Effect of holding time on SiC whiskers growth of SiCw/SiC composites based on SLS technology and their mechanical properties

The effect of whisker orientation in SiC whisker-reinforced Si3N4 ceramic matrix composites

The morphology and substructure of SiC whisker in SiCw/Al composite

Strengthening Behavior in SiC Nanowires Reinforced Pure Al Composite

The Dual Effect Of Whiskers On Toughening And Conducting Properties In Aligned Sic Whisker-Reinforced Si3n4-Matrix Composites

Influence of SiC whiskers on creep behavior of Al-Fe-V-Si alloy

In Situ Observation of Fracture Behavior of in Situ TiBw/Ti Composites

Microstructural Evolution and Growth/degradation Behavior of in Situ TiB Whiskers in ZrB2-SiC Joints Using Ti/Ni/Ti Filler