Abstract:The loading method of the external excitations generated by the equipment directly affects the predicted result of the mechanical noise which should be the same under different excitation forms for the given equipment. In this paper, general load criteria are proposed to define forces/moments as the standard form and convert other forms of loads in the low-frequency domain. As the most typical form to charac-terize equipment excitation, acceleration load loading methods for different conditions are investigated. The equivalent formula between ideal accelerations and generalized forces establishes the first load cri-terion. The second load criterion is proposed to address the issue of an average acceleration loading, in which the phase and amplitude distribution are both absent, and cannot apply to the load identification. The upper and lower limits of the mechanical noise can be determined by the vibroacoustic transfer func-tion of the three load models, and the energy-averaged value is used to represent the mechanical noise. Furthermore, the third criterion is used to handle the case where the acceleration load is given by the results of a bench test. According to the equipment source descriptor invariance, the conversion method is achieved between the bench test and the real ship based on the transfer function of a load model, and the mechanical noise is predicted by an equivalent energy method. Finally, a three-parameter method to quantitatively evaluate the well-fitting of experimental and numerical results, and the load criteria are well validated by underwater acoustic experiments of an experimental model.(c) 2022 Shanghai Jiaotong University. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ )

Load Transferring Technique of Excitation Sources for Ship’s Equipment and Its Application

Analysis of the Ship Loader's Vibration Mode in the Roll-On Process and the Reinforcement Scheme

The load criteria for ship mechanical noise prediction in low frequencies and experimental validation

Analysis of Wind Load Effect on Ship Loader in Shipping Process

Vibration Transmission Assessment of Ship Auxiliary Machinery with Varying Mass Based on Power Flow Method

Study on Vibration Characteristics of Ship Mining System under Composite Load

The influence of dynamic loads on the FE model of the ship equipment-base system

Study on Vibration Characteristics of Ship Bearing Rotor System under Pitching

Effect of excitation type on vibration characteristics of typical ship grillage structure

Vibration Response Analysis of a New Scientific Research Ship Based on Finite Element Modeling

Application of Statistical Energy Analysis Method in Ship Noise and Vibration Control

Numerical Simulation and Experimental Study on Dynamic Characteristics of Gas Turbine Rotor System Subjected to Ship Hull Excitation

Energy-averaged Method for Ship Mechanical Noise Prediction under Kinematic Excitation in the Full Frequency Domain

Vibration Source Identification and Diagnosis Based on the Source Number Estimation for Ships

Contribution Ratio of Excitation Sources to the Underwater Acoustic Radiation of the X-BOW Polar Exploration Cruise Ship

Fast Average Prediction Method Based on the Upper -Lower Limit Theory for Ship’s Mechanical Noise

Experimental and Numerical Study on Vibration of the Full-Revolving Propulsion Ship Stern

Measuring and Processing about the Acceleration of Experimental Platform Simulating Ship Wave Movement

Analysis of Sound Radiation Induced by Typical Engine in the Ship on the Basis of AutoSEA2

Automation System Vibration Analysis Taking Environmental Factors into Consideration

Dynamic Analysis of Ship-borne Device Based on Sea State Excitation