Abstract:The submerged floating tunnel (SFT) is a novel traffic structure for crossing long channels and deep waterways. The moving vehicles within the SFT have a remarkable influence on structural vibration response. To analyze the eccentric load effect of vehicles in the SFT, the structure is simplified as a spatial beam on elastic foundation, while the vehicle is simulated as a seven-DOF model with three dimensions. Using the Morison equation to express the effect of nonlinear fluid resistance, the vehicle-tunnel coupling vibration equations under the action of a motorcade running on one lane of the roadway are derived using the Hamilton Principle. Then, with the help of the mode superposition method and the fourth-order Runge?Kutta method, the solution for the equation is obtained. The accuracy of the proposed theoretical derivation and corresponding programming are verified by the finite element method. Based on the analysis, the SFT with a total span of 1000 m is selected as the research object to explore the spatial behavior of the SFT under vehicle-tunnel coupling vibration. The results show that the vertical displacement peak appears at the quarter-span of the tube, whereas the peaks of horizontal displacement and torsional angle appear at the mid-span under the eccentric load of a motorcade. The contribution of high order modes on the structural displacement should be considered. Moreover, the form of the motorcade affects the vertical displacement and torsional angle of the tube, and with the change of motorcade layout and vehicle speed, the resonance effect and vibration elimination effect will appear in the vehicle-tunnel coupling vibration system. Furthermore, the design parameters of the cable have a significant effect on the deformation resistance of the tube, therefore the selection and layout of the cable should take both the anchoring stiffness and material cost into account. For controlling the eccentric load effect, the inclined angle and installation angle of the cable are recommended to be 60? and 75?, respectively.

Effect of excitation type on vibration characteristics of typical ship grillage structure

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Environmental vibration induced by vehicle in complicated field

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Analysis of Wind-induced Vibration Effects of a Funnel-shaped Open Membrane Structure

Contribution Ratio of Excitation Sources to the Underwater Acoustic Radiation of the X-BOW Polar Exploration Cruise Ship

Vibration Response Analysis of a New Scientific Research Ship Based on Finite Element Modeling

Effects of Steel Spring Floating Slab on Vibration and Noise of a Rail Transit Box-Girder

Numerical Simulation and Experimental Study on Dynamic Characteristics of Gas Turbine Rotor System Subjected to Ship Hull Excitation

Vibration Characteristics of Damping Pad Floating Slab on the Long-Span Steel Truss Cable-Stayed Bridge in Urban Rail Transit

Analysis of vibration properties about two different types of buildings

A Theoretical Investigation on Characteristic Frequencies of Ground Vibrations Induced by Elevated High Speed Train

Study on Vibration Response of Submerged Floating Tunnel Considering Vehicle Eccentric Load

Numerical and experimental investigation of vibro-acoustic characteristics of a submerged stiffened cylindrical shell excited by a mechanical force

Experimental and numerical investigation on vibro-acoustic performance of a submerged stiffened cylindrical shell under multiple excitations

Study on the influence of pipe effect on the vibration characteristics of electro-hydraulic exciter

Research on out-of-plane vibration band gap calculation of two-dimensional periodic grillage structures based on spectral element method

Study on vibro-acoustic performance of composite laminates under transient impact excitation

Low frequency vibration isolation characteristics and intelligent design method of hull grillage metastructures