Abstract:The vibration caused by blasting load may result in damage to high-rise buildings. In view of this consideration, an investigation of the vibration law was conducted in the context of an actual engineering project. The objective of this study was to analyze the peak particle velocity (PPV), vibration frequency, and peak particle stress (PPS) of the buildings within a range of 50 m to 250 m from the epicenter, under the condition of a single-shot charge of 30 kg. To achieve this, a combination of theoretical analysis, field tests, and numerical experiments was employed. Sadovsky's formula was used in combination with the least squares method to fit the propagation law of ground PPV. ANSYS 17.0/LS-DYNA and Origin 8.0 software were applied to study the amplification effect of building PPV and the relationship between PPV and PPS. Taking into account the difference between the height of the ground measuring point and the height of the explosive center, we investigated the PPV of high-rise buildings under three conditions of 36 m, 6 m, and −24 m drop from the explosive center, to strengthen the in-depth understanding of resonance effect. The following conclusions were reached: the ground PPV decreases with increasing horizontal distance from the explosive center, with the radial PPV being the largest. The vertical PPV of buildings exhibits a height amplification effect, with a magnification factor of 2.66. The radial and tangential PPVs of buildings demonstrate that the middle layer exhibits a relatively modest speed, whereas the low and high layers demonstrate considerably higher speeds. The greater the vertical distance from the explosion center is, the greater is the PPV. The vibration frequency is irregular, with an average of 10 Hz. The PPV of buildings is not proportional to the PPS, which is the highest at the bottom. It is recommended that the PPS of buildings be included in the criteria for safety allowances in blasting vibration.

Analysis of vibration properties about two different types of buildings

Vibration Reduction Analysis of an Old Residential District under Vehicle Load

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Vibration Serviceability Analysis of Buildings Near the Area of Blasting Operation

Calculation and Analysis of the Impact of Shield Tunnel Operation on the Vibration of Hangzhou Ancient White Pagoda

Vibration Reduction for Brick-concrete Buildings in an Old Residential Area

The analysis of building vibration induced by the road traffic

Vibration Tests and Crack Analyses on Multi-Storeys Industrial Factory Buildings

Research on the Vibration Response of High-Rise Buildings under Blasting Load

The Transmission Characteristics and Influence Prediction of Impulsive Vibration Caused by a Solid Metal Ball Impact in Buildings

Practical Back-Analysis Methodology to Predict Underground Train-Induced Building Vibrations

Vibration test of a high-rise building and seismic performance analysis

DYNAMIC ANALYSIS OF BUILDING VIBRATION INDUCED BY TRAIN ALONG RAILWAYS

In-situ experimental investigation of the influence of structure characteristics on subway-induced building vibrations

Vibration and Wave Propagation in High-Rise Industrial Buildings

Analysis of Effects Induced by Subway Train on Surrounding Building Vibration

Predicting the Influence of Vibration from Trains in the Throat Area of a Metro Depot on Over-Track Buildings

Predict the Influence of Environmental Vibration from High-Speed Railway on Over-Track Buildings

Comparative analysis of track damping effect of structure jointly constructed by subway tunnels and high-rise buildings

Dynamic Response Characteristic of Building Structure under Blasting Vibration of underneath Tunnel

Research of Effects and Control Methods of Ancient Stone Pagoda Vibration Caused by Shield Tunnel Construction