Abstract:During blasting excavation in deep-buried tunnels and mines characterized by high in situ stress, the rock vibration is attributed not only to blast loading, but also to dynamic unloading caused by transient release of the in situ stress on excavation faces in the process of rock fragmentation by blasting. Understanding the vibration frequency characteristics under these two excitation sources is of important signification to determine appropriate vibration threshold limits for structure damage in deep-buried opening excavations. With a theoretical model developed for a deep-buried circular tunnel excavation by the millisecond delay blasting sequence, frequency characteristics and their influence factors are investigated and discussed for the vibrations induced by the blast loading, the dynamic unloading and the combined effects, respectively. The results show that the rising time of blast loading, the duration of dynamic unloading and the dimension of excavation boundaries are the main factors that affect the vibration frequency of blasting excavation in highly stressed rock masses. It is found that, the blast loading with a much shorter rising time accentuates higher vibration frequency than the dynamic unloading with a long duration, and it causes the blast loading vibration to be more readily attenuated as the propagation distance increases. Thus, the unloading vibration may become the main vibration component at far distances where its low-frequency vibration may exceed the vibration limits. The vibration induced by the combined effects has two distinctly dominant frequency bands corresponding to the two vibration excitation sources. The frequency analyses of the vibration records from two underground projects excavated by blasting are presented to demonstrate this finding. The findings of this study also clearly reveal that, reducing the dimension of excavation boundaries is one of the most effective means to prevent the vibrational damage to structures as it increases the vibration frequency and meanwhile reduces the peak particle velocity.

Vibration Serviceability Analysis of Buildings Near the Area of Blasting Operation

Analysis of vibration properties about two different types of buildings

Research on the Vibration Response of High-Rise Buildings under Blasting Load

Vibration Reduction Analysis of an Old Residential District under Vehicle Load

Vibration Reduction for Brick-concrete Buildings in an Old Residential Area

Vibration Serviceability Analysis of Floor Structures under Pedestrian Loads

Influence of Depth and Position of Vibration-Isolating Slot on Damping Effect of Blasting Vibration

Numerical Simulation of Dynamic Damage and Stability of a Bedding Rock Slope under Blasting Load

Safety Evaluation and Application of Blasting Vibration Based on an Improved Hilbert–Huang Transform

Dynamic Response Characteristic of Building Structure under Blasting Vibration of underneath Tunnel

STUDY OF SAFETY EVALUATION METHOD OF BLASTING VIBRATION BASED ON INPUT ENERGY

The Transmission Characteristics and Influence Prediction of Impulsive Vibration Caused by a Solid Metal Ball Impact in Buildings

Study on Vibration-Damping Blasting Technique for Early-Age Concrete

Impact Vibration of Free Standing Equipment Subjected to Blast Vibrations

Structural vibration characteristics of the historical building in a nearby blasting test

Effect of the Rock Blasting Sequence on Buildings Adjacent to the Hehui Expressway

Resistance model for vibration serviceability design of engineering structures

VIBRATION COMFORT ANALYSIS AND DESIGN OF CONCRETE FLOOR BASED ON ANNOYANCE RATE

Calculation of Damage Caused by Blasting Vibration on Surrounding Rocks of Water-conveyance Tunnel across the Yellow River

Peak Acceleration Response Spectrum of Long Span Floor Vibration by Pedestrian Excitation

A Study on the Vibration Frequency of Blasting Excavation in Highly Stressed Rock Masses