Abstract:Over the last two decades, office floors have been built progressively lightweight with increasing spans and slenderness. Therefore, vibration performance of office floors due to walking dynamic loads is becoming their governing design criterion, determining their size and shape, and therefore overall weight and embodied energy of the building. To date, floor design guidelines around the world recommend walking load scenarios in offices featuring some or all of the following standard characteristics: (a) walking loads are assumed to be periodic dynamic excitation represented by the Fourier series, including harmonics corresponding to up to the first four integer multiples of the pacing frequency of which at least one is exciting the floor at a resonant frequency and (b) single person walking. However, the literature surveyed provides evidence that such assessment methodology is potentially an over-simplification which does not reflect real walking load scenarios, since crucial features of the floor vibration source, path and receiver are missing. First, in terms of vibration source, realistic scenarios need to feature (a) moving rather than stationary walking forces, (b) stochastic nature of human gait, (c) simultaneous multi-person walking and (d) human–structure interaction. Second, for the transmission path (i.e. office floor structure), two features are needed to consider: (a) realistic office floor layouts and (b) presence, or absence, of non-structural elements. Finally, for the vibration receivers (i.e. floor occupants), (a) vibrations calculated at floor locations occupied by users (instead of at the potential highest response location which may not be occupied), (b) actual period over which occupants feel vibration due to such excitation and (c) assessment of vibration levels based on their probability of occurrence. This study therefore addresses these seldom considered but increasingly important features and discusses realistic approaches to floor design for vibration serviceability.

Vibration Serviceability Analysis of Floor Structures under Pedestrian Loads

Peak Acceleration Response Spectrum of Long Span Floor Vibration by Pedestrian Excitation

Comfort assessment for a pedestrian passageway suspended under a girder bridge with random traffic flows

VIBRATION COMFORT ANALYSIS AND DESIGN OF CONCRETE FLOOR BASED ON ANNOYANCE RATE

Vertical Vibration of Complex and Slender Footbridges Due to Stochastic Crowd-Induced Excitation

Study on Natural Frequency of Concrete Floor Based on Vibration Serviceability

Probability Distribution of Footbridge Peak Acceleration to Single and Multiple Crossing Walkers

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Deterministic and Probabilistic Serviceability Assessment of Footbridge Vibrations Due to a Single Walker Crossing

Vibration Reduction Analysis of an Old Residential District under Vehicle Load

Vibration Reduction for Brick-concrete Buildings in an Old Residential Area

Vibration Analysis of Beam and Block Precast Slab System due to Human Vibrations

Analysis of Response Spectrum for Random Pedestrian Loads

Vibration Response Analysis of Long-Span Footbridge to Random Walking Loads Generated by Crowds

Vibration Serviceability Analysis of Buildings Near the Area of Blasting Operation

RMS acceleration response spectrum method of large-span footbridge under pedestrian excitation

Vibration serviceability assessment of office floors for realistic walking and floor layout scenarios: Literature review

Dynamic Response Analysis of the Floor Structure under Random Crowd Excitation

Vibration Serviceability Assessment of Pedestrian Bridges Based on Comfort Level

Quantification of Pedestrian's Comfort Level and Dynamic Properties of Footbridge Vibration Based on In-Situ Measurement

Numerical Investigation on the Natural Frequency of RC Slab Reinforced with Cambered Steel Beam for Reducing Heavy-Weight Impact Noise