Abstract:The prediction of noise radiated by underwater structures is one of the most important research topics in the field of acoustics. This paper aims to set up an integrated approach for acoustic radiation analysis that could be used to assess and optimize the vibro-acoustic performance of pre-determined design targets, while identifying and quantifying the sound sources responsible for the behaviour. Such an approach, based on numerical procedures or experimental data, enables the fast prediction of sound radiation from a typical submarine cabin (a double cylindrical shell with superstructure). Vibro-acoustic prediction in the low- to mid-frequency range is generally performed through the boundary element method (BEM) or finite element method (FEM). In this paper, a combined usage of the two methodologies is adopted: FEM is used for the structural dynamics and BEM for the acoustic problem resolution. The acoustic field obtained by the FEM/BEM approach is adopted as the reference result. Meanwhile, acoustic transfer vector (ATV) technology is performed with the use of velocity distribution of the cabin. It is verified that the calculation results between the two methods are in substantial agreement, while the ATV method shows greater efficiency. Experimental research on the vibration of a scaled model is also performed. Comparing the experimental and numerical radiation results based on measured vibration data enables the accuracy level of the ATV forecast method to be assessed. From this, it is probable that the fast prediction of sound radiation by use of ATV is an effective approach for rapid evaluation of the vibro-acoustic response in the engine development process.

Analysis of Sound Radiation Induced by Typical Engine in the Ship on the Basis of AutoSEA2

Method for estimating internal loss factor of plate&shell structure based on acoustic excitation

Statistical Analysis of Vibration and Sound Radiation of Submerged Stiffened Rectangular Plates

Prediction and Control of Cabin’s Noise of a Three-hulled High-speed Ship

Application of a Hybrid Method in the Analysis Acoustic-structure Coupled System

Research on Vibration and Acoustic Radiation of the Submarine Structure with SEA Method

Coupling and Optimization Analysis of Magnesium Bulkhead and Interior Sound Field Based on SEA

Finite Element Analysis on Acoustic Characteristic of Double Bubble in Ship Wake

Vibro-acoustics Analysis of Shallow-Sea Super Large FPSO

Vibration Response Analysis of a New Scientific Research Ship Based on Finite Element Modeling

MODELING METHOD FOR ANALYSIS OF VIBRATION AND CABIN NOISE DISTRIBUTION ON LARGE CONTAINERSHIP

Numerical Analysis of Acoustic Characters in Near Field and Self-Noise of Ship

Application of Statistical Energy Analysis Method in Ship Noise and Vibration Control

Noise reduction analysis for car body panels based on hybrid FE-SEA method

A Time Domain Three-Dimensional Sono-Elastic Method for Ships’ Vibration and Acoustic Radiation Analysis in Water

Energy-averaged Method for Ship Mechanical Noise Prediction under Kinematic Excitation in the Full Frequency Domain

The Fast Prediction of Sound Radiation from Typical Submarine Cabin Based on Acoustic Transfer Vector

Three-Dimensional Hydroelasciticity Analysis of Acoustic Responses of Ship Structures

Analysis of the structural vibration and noise radiation of a SWATH ship based on hydroelastic method

Statistical Energy Analysis for Complicated Coupled System and Its Application in Engineering

Comparative Study on Numerical Methods for Underwater Low-Frequency Radiation Noise of Ship