A modelling approach for noise transmission through extruded panels in railway vehicles

Hui Li,Giacomo Squicciarini,David Thompson,Jungsoo Ryue,Xinbiao Xiao,Dan Yao,Junlin Chen

DOI: https://doi.org/10.1016/j.jsv.2021.116095

IF: 4.7

2021-06-01

Journal of Sound and Vibration

Abstract:<p>The noise inside railway vehicles plays an important role for the comfort of passengers and train crew. In determining the interior noise, the noise transmission through the train floor and sidewalls is particularly important. Modern train body structures are often made of extruded aluminium panels and the current work focuses on modelling the noise radiation from, and transmission through such structures. Use is made of a statistical energy analysis (SEA) approach which is established with the support of a waveguide finite element (2.5D FE) model. The latter is used to study the vibration properties of the extruded panel that are then utilized to calibrate simple equivalent analytical models for the various components of the extrusion. These in turn are used to define the input parameters for the SEA model, e.g. the modal densities and the coupling loss factors between subsystems. With the aid of such a calibration, the predictions from the SEA model of the sound transmission loss and of the radiation efficiency of the extruded panel agree well with measurements and numerical models using the 2.5D FE/BE approach and the VA One software. By following the procedures outlined in this paper, SEA models can be established by using a simple analytical representation of different parts of the extruded panel and hence without the need to develop ad-hoc and computationally expensive numerical models.</p>

engineering, mechanical,mechanics,acoustics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the internal noise problem of railway vehicles, especially the noise transmission through the train floor and side walls. Specifically, the modern train body structure is usually composed of extruded aluminum plates. These aluminum plates have complex geometric shapes and structural characteristics, which make it difficult for traditional finite element (FE) and boundary element (BE) methods to accurately predict their acoustic performance, especially the vibration and sound radiation characteristics in the high - frequency range.

To meet this challenge, the author proposes a modeling method that combines statistical energy analysis (SEA) and waveguide finite element (2.5D FE) methods. This method aims to:

1. **Establish an efficient modeling method**: Represent different parts of the extruded panel by using simple analytical models, thereby avoiding the development of complex and computationally expensive numerical models.
2. **Improve prediction accuracy**: Ensure that the prediction results of the SEA model are consistent with the experimental measurements and the results of numerical models based on the 2.5D FE/BE method, especially in terms of sound transmission loss and radiation efficiency.
3. **Simplify parameter calibration**: Use the vibration characteristics calculated by the 2.5D FE model to calibrate the key parameters in the SEA model, such as modal density and coupling loss factors (CLFs), to ensure the accuracy of the model.

Through the above methods, researchers hope to provide a more efficient and accurate modeling tool for noise control in railway vehicles, thereby improving the comfort of passengers and crew members.

### Formula Summary

- **Modal Density Calculation**:
\[
n(f)=\frac{\text{Number of modes}}{f_2 - f_1}
\]
where \(f_1\) and \(f_2\) are the lower and upper frequencies of the 1/3 - octave frequency band respectively.

- **SEA Energy Balance Equation**:
\[
P_{\text{in},i}=P_{d,i}+\sum_{i\neq j}P_{i,j}-\sum_{i\neq j}P_{j,i}
\]
where \(P_{\text{in},i}\) is the input power of the \(i\) - th subsystem, \(P_{d,i}\) is the dissipated power, \(P_{i,j}\) is the power flow from subsystem \(i\) to subsystem \(j\), and \(P_{j,i}\) is the power flow from subsystem \(j\) back to subsystem \(i\).

- **Bending Stiffness Calculation**:
\[
B = \sqrt{B_xB_y}
\]
where \(B_x\) and \(B_y\) are the bending stiffness along the \(x\) and \(y\) axes respectively.

These formulas and methods together form the core content of this research, aiming to solve the internal noise problem of railway vehicles and optimize the carriage structure design.