Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. To address the challenge associated with optimizing the number and positioning of accelerometer points in ship acoustic reconstruction, factor analysis is applied to the automatic optimization of accelerometer position in this work according to the source independence of ship's underwater radiated noise. Based on the numerical simulation method that calculates the vibration noise response under specific operation conditions, the minimum number and the optimal position of the accelerometers can be obtained through the factor analysis and multi-parameter comprehensive evaluation method. The results of acoustic reconfiguration and testing are compared using one test cabin as a validation object to verify the effectiveness of the proposed method. The results show that the automatic optimization algorithm can improve the reconstruction accuracy concerning the uniform distribution method. The error is reduced from 15.46% (1.5 dB) to 8.35% (0.8 dB), and the correlation coefficient is improved from 0.86 to 0.89. The semi-automatic optimization method is slightly lower in terms of errors and correlation coefficients compared to the automatic optimization algorithm. After increasing the number of monitoring positions for automatic optimization, the acoustic reconstruction accuracy is further improved, while the average error is reduced to 7.37% (0.7 dB) and the correlation coefficient is improved from 0.89 to 0.92. The experimental results are proximate to the conclusions of the simulation calculation. Even under the circumstance of multi-factor noise interference, the correlation coefficient of multi-position automatic optimization can still reach 0.8, in comparison with the uniform distribution method, the error is reduced from 32.49% (3.4 dB) to 25.94% (2.6 dB). The proposed method effectively captures the dynamic characteristics of complex structures and their impact on underwater radiated noise, and the integration of factor analysis can prominently enhance the computational efficiency, thereby providing technical support for engineering applications to the ship acoustic reconstruction.

Application of Statistical Energy Analysis Method in Ship Noise and Vibration Control

Research on the Influencing Factors of Vibro-acoustic Characteristics of Cylindrical Shells Based on Statistical Energy Analysis

Analysis and Controlling of Pipeline Vibration in Chemical Plant

Tow Ship Noise Cancellation Using Empirical Mode Decomposition

Machine learning based method for analyzing vibration and noise in large cruise ships

Discrete Distribution Model of Ship Noise Source in Shipping Channel

Statistical Energy Analysis for Road Noise Simulation

Vibration Response Analysis of a New Scientific Research Ship Based on Finite Element Modeling

Estimation and Characteristics of Low-Frequency Ambient Sea Noise from Far-Field Ships

Comprehensive analysis and evaluation of ship energy efficiency practices

The Contrast Experimental Study on Operational Modal Analysis of Ship Structural Model

Wave statistics for ship seakeeping in China offshore

Study of Acoustic Vibration in Piping Systems by Energy-Based Finite Element Analysis

A factor analysis based automatic optimization method of vibration sensor points for ship acoustic reconstruction

THE STRUCTURAL VIBRATION ANALYSIS METHOD FOR VEHICLE'S NOISE FACTOR

Prediction of aircraft cabin noise by statistical energy analysis

Ship energy consumption analysis and carbon emission exploitation via spatial-temporal maritime data

Analysis of vibration reduction performance of vibration isolation system based on particle damping

Analysis of Influence of Ship Roll on Ship Power System with Renewable Energy

A Novel Big Data Collection System for Ship Energy Efficiency Monitoring and Analysis Based on BeiDou System

Investigation of acoustic transmission beneath a railway vehicle by using statistical energy analysis and an equivalent source model