Abstract:The loading method of the external excitations generated by the equipment directly affects the predicted result of the mechanical noise which should be the same under different excitation forms for the given equipment. In this paper, general load criteria are proposed to define forces/moments as the standard form and convert other forms of loads in the low-frequency domain. As the most typical form to charac-terize equipment excitation, acceleration load loading methods for different conditions are investigated. The equivalent formula between ideal accelerations and generalized forces establishes the first load cri-terion. The second load criterion is proposed to address the issue of an average acceleration loading, in which the phase and amplitude distribution are both absent, and cannot apply to the load identification. The upper and lower limits of the mechanical noise can be determined by the vibroacoustic transfer func-tion of the three load models, and the energy-averaged value is used to represent the mechanical noise. Furthermore, the third criterion is used to handle the case where the acceleration load is given by the results of a bench test. According to the equipment source descriptor invariance, the conversion method is achieved between the bench test and the real ship based on the transfer function of a load model, and the mechanical noise is predicted by an equivalent energy method. Finally, a three-parameter method to quantitatively evaluate the well-fitting of experimental and numerical results, and the load criteria are well validated by underwater acoustic experiments of an experimental model.(c) 2022 Shanghai Jiaotong University. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ )

The Contrast Experimental Study on Operational Modal Analysis of Ship Structural Model

Model Analysis of Green Water Phenomena and Loading for Ship Sailing with Slow Speed

Review of modal identiifcation of ship structure based on ambient excitation

Full scale cruise ship dynamic identification using operational modal analysis on sea trial data measurements

Experimental Investigation and Numerical Simulation of Ship Stern Structural Vibration Model

The load criteria for ship mechanical noise prediction in low frequencies and experimental validation

Modal analysis of ship stern by numerical and experimental method

A Contrastive Study of Two-Time Scaled Method and Unified Method in Maneuverability-in-Waves

An Extended Modal Approach for Modal Parameter Identification of Structure under the Existence of Harmonic Excitations

Human-induced noise study for cruise cabin: Numerical analysis and experimental validation

Vibration Response Analysis of a New Scientific Research Ship Based on Finite Element Modeling

STUDY ON DYNAMIC BEHAVIOR OF SHIP'S INTERNAL RESONANCE

Numerical Analysis of Acoustic Characters in Near Field and Self-Noise of Ship

Numerical Simulation of Vibration and Noise for Ship Collision

Experimental and Numerical Study on Vibration of the Full-Revolving Propulsion Ship Stern

Application of Statistical Energy Analysis Method in Ship Noise and Vibration Control

Effect of excitation type on vibration characteristics of typical ship grillage structure

Energy-averaged Method for Ship Mechanical Noise Prediction under Kinematic Excitation in the Full Frequency Domain

Analysis of the structural vibration and noise radiation of a SWATH ship based on hydroelastic method

Improved Automatic Operational Modal Analysis Method and Application to Large-Scale Bridges

Prediction and Control of Cabin’s Noise of a Three-hulled High-speed Ship