Abstract:In model updating, damage detection and structural health monitoring (SHM), modal identification is usually the first step to calculate the modal properties, such as natural frequencies, damping ratios and mode shapes, of the targeted structure utilizing the measured time-domain responses. Ambient vibration test provides an efficient and economical mean to collect structural vibration responses for the purpose of modal identification since no artificial excitation is required. This paper presents the work on the ambient vibration test and modal identification of a recently constructed boat-shaped building situated in Hong Kong. The building is not an isolated structure, and it is connected with a secondary structure in its fourth and fifth floors. To identify detail mode shapes, sixty-two measurement points were desired. They were located in the three staircases (to minimize the effect on the normal operation of the building) and on a typical floor of the building. Due to the large number of measurement points coving almost all floors of the building, multiple setups with moving references-approach were designed. Some common problems encountered in the field test were discussed in this paper. A recently developed fast Bayesian FFT method was employed to perform the modal identification. This method could identify the most probable value (MPV) of modal parameters efficiently and also calculate the associated posterior uncertainty analytically, providing an important tool to evaluate the accuracy of modal parameters. The first nine modes were identified including five translational modes, two torsional modes, one combined mode and one vertical mode. Due to the connections with other building, torsional behavior was observed in some translations modes. Based on the MPV and the associated uncertainty, the variability of modal parameters across different setups is also addressed. Some interesting feathers of this structure were studied and investigated, providing the baseline for the future SHM and condition assessment of this building. (C) 2017 Elsevier Ltd. All rights reserved.

Review of modal identiifcation of ship structure based on ambient excitation

A REVIEW OF STRUCTURE MODAL IDENTIFICATION METHODS THROUGH AMBIENT EXCITATION

The Contrast Experimental Study on Operational Modal Analysis of Ship Structural Model

Modal Parameter Identification of Offshore Platforms under Ambient Excitation

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

Full scale cruise ship dynamic identification using operational modal analysis on sea trial data measurements

Modal analysis of ship stern by numerical and experimental method

Parameters Identification of Linear Structures Undergoing Ambient Excitation Using Mode Decomposition

Operational Modal Identification of a Boat-Shaped Building by a Bayesian Approach

Review and comparison of methods and Benchmarks for automatic modal identification based on stabilization diagram

Load Transferring Technique of Excitation Sources for Ship’s Equipment and Its Application

Modal Parameters Identification of Time-Varying System Based on Hilbert-Huang Transform

Experimental Investigation and Numerical Simulation of Ship Stern Structural Vibration Model

Vibration Response Analysis of a New Scientific Research Ship Based on Finite Element Modeling

Modal Parameter Identification of a Bridge Under Ambient Excitation

A New Method for Modal Parameter Identification Based on Analytical Modal Decomposition and Hilbert Transformation

Damage Localization of Offshore Platforms under Ambient Excitation

Modal Characteristics of a Scaling Stratospheric Airship in Still Air

Dynamic Analysis of the Structure of a Container Ship

Effect of excitation type on vibration characteristics of typical ship grillage structure

Modal Identification of Multi-Degree-of-freedom Structures Based on Intrinsic Chirp Component Decomposition Method