Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. To address the challenge associated with optimizing the number and positioning of accelerometer points in ship acoustic reconstruction, factor analysis is applied to the automatic optimization of accelerometer position in this work according to the source independence of ship's underwater radiated noise. Based on the numerical simulation method that calculates the vibration noise response under specific operation conditions, the minimum number and the optimal position of the accelerometers can be obtained through the factor analysis and multi-parameter comprehensive evaluation method. The results of acoustic reconfiguration and testing are compared using one test cabin as a validation object to verify the effectiveness of the proposed method. The results show that the automatic optimization algorithm can improve the reconstruction accuracy concerning the uniform distribution method. The error is reduced from 15.46% (1.5 dB) to 8.35% (0.8 dB), and the correlation coefficient is improved from 0.86 to 0.89. The semi-automatic optimization method is slightly lower in terms of errors and correlation coefficients compared to the automatic optimization algorithm. After increasing the number of monitoring positions for automatic optimization, the acoustic reconstruction accuracy is further improved, while the average error is reduced to 7.37% (0.7 dB) and the correlation coefficient is improved from 0.89 to 0.92. The experimental results are proximate to the conclusions of the simulation calculation. Even under the circumstance of multi-factor noise interference, the correlation coefficient of multi-position automatic optimization can still reach 0.8, in comparison with the uniform distribution method, the error is reduced from 32.49% (3.4 dB) to 25.94% (2.6 dB). The proposed method effectively captures the dynamic characteristics of complex structures and their impact on underwater radiated noise, and the integration of factor analysis can prominently enhance the computational efficiency, thereby providing technical support for engineering applications to the ship acoustic reconstruction.

Measuring and Processing about the Acceleration of Experimental Platform Simulating Ship Wave Movement

Simulation to Random Ocean Wave Spectrum Using Six Degrees of Freedom Ship Motion Simulator

Monitoring the vertical changes of a tidal flat using a MEMS accelerometer array

Dynamic deformation monitoring of an offshore platform structure with accelerometers

Design and Implementation of a Long-Term Ship-Monitoring System Using Vector Hydrophone

Research on the Online Measurement of Automobile Engine Speed Based on Vibration Analysis

Ship heave measurement method based on sliding adaptive delay-free complementary band-pass filter

On the Short-Term and Long-Term Acceleration Failure Probability of a Container Ship in Irregular Waves

A factor analysis based automatic optimization method of vibration sensor points for ship acoustic reconstruction

Load Transferring Technique of Excitation Sources for Ship’s Equipment and Its Application

Research on Attitude Compensated Algorithm for Shipborne Dynamic Weighing

Versatile and Effective Design Platform for Surface Acoustic Wave Accelerometers

Realization of acceleration measuring system based on QF4A512

The influence of dynamic loads on the FE model of the ship equipment-base system

Study Of Space Micro-Vibration Active Isolation Platform Acceleration Measurement

Identification of a Mechanism′s Vibration Velocity and Displacement Based on the Acceleration Measurement

Spectrogram analysis of surface elevation signals due to accelerating ships

Validation and Evaluation of a Ship Echo-Based Array Phase Manifold Calibration Method for HF Surface Wave Radar DOA Estimation and Current Measurement

Measurement of Acceleration Response Functions with Scalable Low-Cost Devices. An Application to the Experimental Modal Analysis

Monitoring and forecasting system for ship attitude motion based on extended Kalman filtering algorithm

Measurement Model and Precision Analysis of Accelerometers for Maglev Vibration Isolation Platforms