Abstract:This study had two aims: (i) to determine the effects of calcination temperature on the hydraulic reactivity of three nanosized X-ray amorphous tricalcium phosphate (ATCP) powders, and (ii) to try to bring a better understanding of the poor reactivity of a-tricalcium phosphate (alpha-TCP) nanoparticles obtained by calcining ATCP powders. For those purposes, five calcination temperatures were selected in the range of 500 to 800 degrees C. Calcination led to the formation of powders consisting of ATCP (500 degrees C), alpha-TCP (600, 650 and 700 degrees C) and beta-tricalcium phosphate (beta-TCP; 700 and 800 degrees C). The powder reactivity was assessed by mixing 0.2 g of powder and 1 mL Na(2)HPO(4) 0.2 M solution in an isothermal calorimeter. The total reaction time was a function of the calcination temperature: from a few minutes for ATCP powders and ATCP powder calcined at 500 degrees C, it increased to several hours for ATCP powder calcined at 600, 650 and 700 degrees C. Interestingly, this change of reaction time was mostly due to an increase of the so-called induction time, i.e. time to start the reaction. It increased from a few seconds to a few hours. Strikingly, the induction time and the total reaction time were reduced by an increase of the calcination temperature from 650 to 700 degrees C. The results were attributed to the formation of a defect-free surface upon calcination and the concomitant difficulty in creating surface defects to allow dissolution and hence reaction.

Synthesis, Sintering Behavior and Morphology of Β-Tricalcium Phosphate Via Sol-Gel Self-Propagating Combustion Technique

A Simple Sol-Gel Technique for Synthesis of Nanostructured Hydroxyapatite, Tricalcium Phosphate and Biphasic Powders

Structural characterization of room-temperature synthesized nano-sized β-tricalcium phosphate

Effect of different ball milling processes on purity and particle size ofβ-tricalcium phosphate powders by solid-state synthesis

Microemulsion Synthesis of Mesoporous β-tricalcium Phosphate Powder with a Novel System

Solvothermal Synthesis Of Beta-Tricalcium Phosphate Porous Nanospheres By Using Organic Phosphorus Source And Their Biomedical Potentials

Synthesis and characterization of nanocrystalline PZT powders by a simple sol-gel method

Synthesis of Perovskite Structure (Ca-0.61, Nd-0.26)TiO3 Nanopaticles by Sol-Gel Method

The Effect of Powder Properties on Sintering, Microstructure, Mechanical Strength and Degradability of Β-Tricalcium Phosphate/calcium Silicate Composite Bioceramics

Transformation Mechanism of Different Chemically Precipitated Apatitic Precursors into Beta-Tricalcium Phosphate Upon Calcination.

Synthesis and Characterization of (pb,ca)tio3 Nanocrystalline Powders by Sol-gel Process

Dissolution Behavior of Submicron Biphasic Tricalcium Phosphate Powders

Preparation and Characterization of CaTiO 3 –(li 1 / 2 Nd 1 / 4 Sm 1 / 4 )tio 3 Microwave Ceramics by a Sol–gel Combustion Process

Synthesis and Characterization of Ca3Co4O9 Nanoparticles by Citrate Sol-Gel Method

NANO-SCALE Sm0.15Gd0.05Ce0.8O1.9POWDER PREPARED BY COUPLING ROUTES OF SOL-GEL AND LOW TEMPERATURE SELF-PROPAGATING COMBUSTION

Preparation and Characterization of Nanocrystalline (1−x)bisco3–xpbtio3 Powder

A Low Temperature Co-Precipitation Preparation of Nano-Sized Zinc Containing Β-Tricalcium Phosphate Powders

Sol Gel Combustion Derived Monticellite Bioceramic Powders for Apatite Formation Ability Evaluation

Effect of Thermal Treatments on the Reactivity of Nanosized Tricalcium Phosphate Powders

Preparation of highly purified β-tricalcium phosphate ceramics with a microdispersion process

Tailoring the mechanical property and cell-biological response of β-tricalcium phosphate composite bioceramics by SrO-P 2 O 5 -Na 2 O based additive.