Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A Compact Ka-Band Hybrid Analog/Digital Phase Shifter with GaAs Technology

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

An E-band Subradix Active Phase Shifter with < 0.69° RMS Phase Error and 16-Db Attenuation in 28-Nm CMOS

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

An Ultra Broadband Passive Vector Modulator Phase Shifter

Hybrid broadband high-precision phase shifter integrated circuit

A Ka-band 8-Element 4-Beam Transmitter Front End with Hybrid VGA and Symmetrical Transformer-based Doherty PA

A 23‐ to 28‐ghz 5‐bit Switch‐type Phase Shifter with 1‐bit Calibration Based on Optimized ABCD Matrix Design Methods for 5G MIMO System in 0.15‐μm GaAs

A 32-40 GHz 7-bit Bi-Directional Phase Shifter With 0.36 dB/1.6 RMS Magnitude/Phase Errors for Phased Array Systems

A 28ghz Rf Phase Shifter With High Phase Resolution In 180-Nm Cmos Technology

An X-band 22.5°/45° Digital Phase Shifter Based on Switched Filter Networks

Ka-Band 4-Bit Phase Shifter With Low Phase Deviation

A Ka-band 0/Π MEMS Phase Shifter

A Ka-band 0/∏ MEMS phase shifter

A 6-Bit 38 GHz SiGe BiCMOS Phase Shifter for 5G Phased Array Communications.

A 9-Bit Vector-Sum Digital Phase Shifter Using High Resolution VGAs and Compensated Quadrature Signal Generator

Low Insertion Loss, Compact 4-bit Phase Shifter in 65 nm CMOS for 5G Applications

Design of an X-Band GaN 5 bit Digital Phase Shifter MMIC

A 32-38Ghz Full-360° Low-Phase-Error 6-Bit Passive Phase Shifter in 0.15μm GaAs

A 21 to 30-Ghz Merged Digital-Controlled High Resolution Phase Shifter-Programmable Gain Amplifier with Orthogonal Phase and Gain Control for 5-G Phase Array Application