Abstract:This article presents an 18 similar to 30 GHz vector-sum phase shifter for wireless application in the millimeter-wave regime. It is composed of an I/Q signal generator, two variable-gain amplifiers (VGA), and a digital-to-analog converter with a quadrant selector. To attain wideband quadrature signal, a two-stage hybrid based on transformers is proposed to realize the I/Q signal generator. The first- and second-stage hybrids are designed with different resonating frequencies. As a result, the amplitude and phase errors of the I/Q signal generator are significantly decreased in a wide frequency band. In addition, theoretical analysis based on a simplified equivalent-circuit model is performed to guide the circuit implementation, and its correctness is demonstrated by electromagnetic simulation. To mitigate the impact of the VGAs' parasitics on the phase performance, a capacitive-neutralization technique is applied to cancel parasitics of transistors in the VGAs. A prototype circuit is designed using a 130-nm SiGe BiCMOS process. The measured results show that the circuit achieves a root-mean-square (RMS) amplitude error of less than 1.4 dB and an RMS phase error of 1.4 degrees similar to 3.4 degrees across 18 similar to 32 GHz. The tested peak gains of all the phase states are -1 similar to 4.5 dB with an input balun (approximate to 1.9 dB loss) and an output balun (approximate to 2 dB loss) at 22 GHz. Also, the input 1-dB compression point and noise figure are tested, which are >=-1 dBm and <= 15.5 dB in the targeting frequency band.

A 23‐ to 28‐ghz 5‐bit Switch‐type Phase Shifter with 1‐bit Calibration Based on Optimized ABCD Matrix Design Methods for 5G MIMO System in 0.15‐μm GaAs

29-/35 GHz Dual-band High-Gain Phase Shifter with Hybrid -Networks

An 18 similar to 30 GHz Vector-Sum Phase Shifter With Two-Stage Transformer-Based Hybrid in 130-nm SiGe BiCMOS

An 18~30 GHz Vector-Sum Phase Shifter with Two-Stage Transformer-Based Hybrid in 130-Nm SiGe BiCMOS

An Ultra Broadband Passive Vector Modulator Phase Shifter

A 6-Bit 38 GHz SiGe BiCMOS Phase Shifter for 5G Phased Array Communications.

A 28ghz 6-Bit Two-stage Vector-sum Phase Shifter with Low RMS Error for 5G Mobile Communication

A Phase Shifter Design for 5G Communication

A Compact Ka-Band Hybrid Analog/Digital Phase Shifter with GaAs Technology

A 24-30Ghz 4-Element Phased Array Transceiver with Low Insertion Loss Compact T/R Switch and Bidirectional Phase Shifter in 65 Nm CMOS Technology

A 32-38Ghz Full-360° Low-Phase-Error 6-Bit Passive Phase Shifter in 0.15μm GaAs

A 32-40 GHz 7-bit Bi-Directional Phase Shifter With 0.36 dB/1.6 RMS Magnitude/Phase Errors for Phased Array Systems

A 28ghz Rf Phase Shifter With High Phase Resolution In 180-Nm Cmos Technology

A 27–31 ghz 6-Bit Phase Shifter with Low Phase Error/gain Variation in 65 nm CMOS

A 1.7–2.7-GHz 4-bit Phase shifter based on packaged RF MEMS switches

A 24-27Ghz Phased Array Transceiver with 6bit Phase Shifter and 31.5db Gain Control for 5G Communication in 65nm CMOS

Low Insertion Loss, Compact 4-bit Phase Shifter in 65 nm CMOS for 5G Applications

An X-band 22.5°/45° Digital Phase Shifter Based on Switched Filter Networks

Design and Performance of a Wideband Ka-Band 5-B MMIC Phase Shifter

A 4-Bit CMOS Phase Shifter for Millimeter-Wave Phased Arrays

A Dual-Band Vector-Sum Phase Shifter for 28-Ghz and 60-Ghz Phased Arrays in 65-Nm CMOS.