Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Solid Concentration in Circulating Fluidized Bed Reactor for the MTO Process

Experimental Investigation on Solid Concentration in Gas-Solid Circulating Fluidized Bed for Methanol-to-Olefins Process

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental Study on Flow Behavior in A Gas-Solid Fluidized Bed for the Methanol-To-Olefins Process

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Methanol to propylene process using moving bed technology and its engineering study

3D Numerical Simulation of a Large Scale MTO Fluidized Bed Reactor

CFD–DEM Modeling of Gas–solid Flow and Catalytic MTO Reaction in a Fluidized Bed Reactor

Comparative Study of MTO Kinetics over SAPO-34 Catalyst in Fixed and Fluidized Bed Reactors

Cold Model Experimental Research on Particle Velocity Distribution in Gas-Solid Circulating Fluidized Bed for Methanol-to-Olefins Process

Cfd Modeling of Methanol to Olefins Process in A Fixed-Bed Reactor

Intraparticle Mass and Heat Transfer Modeling of Methanol to Olefins Process on SAPO-34: A Single Particle Model

MTO Processes Development

Reaction-Regeneration Process of Methanol-to-Light Olefins in Fluidized Bed

Study of the Coke Distribution in MTO Fluidized Bed Reactor with MP‐PIC Approach

Effect of Particle Polydispersity on Flow and Reaction Behaviors of Methanol-To-Olefins Fluidized Bed Reactors

Solid Concentration Distribution in a Gas-Solid Fluidized Bed