Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Experimental Study on Flow Behavior in A Gas-Solid Fluidized Bed for the Methanol-To-Olefins Process

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Experimental Investigation on Solid Concentration in Gas-Solid Circulating Fluidized Bed for Methanol-to-Olefins Process

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Solid Concentration in Circulating Fluidized Bed Reactor for the MTO Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Cold Model Experimental Research on Particle Velocity Distribution in Gas-Solid Circulating Fluidized Bed for Methanol-to-Olefins Process

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Numerical study of the gas–solid flow pattern in methanol to olefiens fluidized bed reactor: Cold model

Performance analysis of methanol to olefins process in fluidized bed reactor

Reaction-Regeneration Process of Methanol-to-Light Olefins in Fluidized Bed

Cfd Modeling of Methanol to Olefins Process in A Fixed-Bed Reactor

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Experimental Study of Gas-Solid Fluidized Bed Hydrodynamics Using Optical Fiber Probe

3D Numerical Simulation of a Large Scale MTO Fluidized Bed Reactor

Effect of Particle Polydispersity on Flow and Reaction Behaviors of Methanol-To-Olefins Fluidized Bed Reactors