Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Effect of Particle Polydispersity on Flow and Reaction Behaviors of Methanol-To-Olefins Fluidized Bed Reactors

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation of multi-fluidized-bed in series for methanol to olefins

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

The Hydrodynamics of Low-Density Particles and Optimization of the EMMS Calculation Process

Modeling of Molecular Weight and Copolymer Composition Distributions for Ethylene‐propylene Solution Copolymerization

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Influence of Slurry Velocity and Concentration Distributions on Fischer-Tropsch Synthesis in Slurry Bubble Column Reactor

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Thermal stability analysis of ethylene polymerization fluidized bed reactors under condensed mode operation through a TPM-PBM integrated model

Effect of hydrodynamic heterogeneity on particle dispersion in a Taylor-Couette flow reactor with variable configurations of inner cylinder

Minimum fluidization velocity of bimodal polyethylene particles

Numerical simulation of commercial MTO fluidized bed reactor with a coarse-grained discrete particle method — EMMS–DPM

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Numerical study of the gas–solid flow pattern in methanol to olefiens fluidized bed reactor: Cold model

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

CFD-DEM study of reactive gas-solid flows with cohesive particles in a high temperature polymerization fluidized bed

Porous-media model based particle-resolved simulation of a fixed bed with olefin catalytic cracking reaction

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Effect of Cohesive Particle Addition on Bubbling Characteristics of Gas-Solid Fluidized Bed: Meso-scale Mechanism

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model