Abstract:Aspheric thin-walled crucibles with large diameters are widely used for photovoltaics and semiconductor industries, while they have hard-brittle and aspheric characteristics. Nevertheless, these crucibles strictly require atomic surfaces and high material removal rate (MRR). This is a challenge for chemical mechanical polishing (CMP). To break this challenge, a novel green CMP was developed for fused silica, containing ceria, lanthana, hydrogen peroxide, diethylene triaminepentaacetic acid pentasodium, carboxymethyl cellulose sodium and guanidine carbonate. After CMP, surface roughness Ra of 0.115 is obtained at a scanning area of 5 × 5 μm2 measured by atomic force microscopy, and MRR is 563 nm/min. In such an atomic surface, the MRR is the highest compared with those published previously. Transmission electron microscopy confirms that the thickness of damaged layer after CMP is only 2.63 nm. A novel approach of robot floating polishing is proposed for aspheric crucibles with a diameter of 810 mm and a height of 580 mm. Using the developed CMP, surface roughness Sa of 0.178 nm on inner surface of an aspheric thin-walled crucible is achieved under a measurement area of 50 × 50 μm2. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance reveal that the content of Ce3+ increased from 28.54 to 43.76 %. Through Raman, XPS and Fourier transform infrared spectroscopy, CMP mechanisms are elucidated. Densified damaged layer on the surface of fused silica was induced by the transformation of surface structure from six-membered to four- or three-membered network. Ce-OH and Si-OH were formed between fused silica and ceria abrasives, forming Ce-O-Si by condensation reaction of dehydration. The developed green CMP and approach provide new pathway to polish and manufacture atomic surfaces for aspheric thin-walled crucibles with large diameters.

Chemical Mechanical Polishing to Improve the Efficiency Uniformity of Beam Sampling Grating

Mechanical Polishing to Improve Uniformity of Beam Sampling Grating and Its Effects on Laser-Induced Damage

Algorithms for Finely Adjusting Etch Depths to Improve the Diffraction Efficiency Uniformity of Large-Aperture Bsg

Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing

Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters

Trivalent lanthanum and ytterbium doped meso-silica/ceria abrasive systems toward chemical mechanical polishing (CMP) and ultraviolet irradiation-assisted photochemical mechanical polishing (PCMP)

Novel green chemical mechanical polishing of fused silica through designing synergistic CeO 2 /h-BN abrasives with lubricity

Surface Texture Evolution of Fused Silica in a Combined Process of Atmospheric Pressure Plasma Processing and Bonnet Polishing

Chemical Mechanical Polishing of Micro-structures on SSiC

Performance Improvement of Chemo-Mechanical Grinding in Single Crystal Silicon Machining by the Assistance of Elliptical Ultrasonic Vibration

A special electrostatic self-assembly structure of colloidal silica: Improving Chemical Mechanical Polishing performance

Chemical mechanical polishing for sapphire wafers using a developed slurry

The CMP by Polishing with GiP Dressed by BODD

Chemical Mechanical Polishing on Extremely Low Expansion Glass Ceramic Wafers

Surface Flatness and Roughness Synchronized Control in CMP Process of Silicon Mirror

Preparation of Non-spherical Colloidal Silica Nanoparticle and Its Application on Chemical Mechanical Polishing of Sapphire

Picosecond Laser-Assisted Chemical Mechanical Polishing (CMP): Aiming at the Si-Face of Single-Crystal 6H-Sic Wafer

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Experimental Investigation on Hybrid Technology of Ultrasonic Vibration Assisted Chemo-Mechanical Grinding (CMG) Silicon Wafer

Preparation of Silane Modified Sio2 Abrasive Particles and Their Chemical Mechanical Polishing (cmp) Performances

Chemical Mechanical Polishing of 4H-SiC Wafer with UV-LED Light