Abstract:The slab laser is a promising architecture to achieve high beam quality and high power. By propagating the laser beams in zigzag geometries, the temperature gradient in the gain medium can be well averaged, and the beam quality in this direction can be excellent. However, the temperature gradient in the non-zigzag direction is not compensated, resulting in aberrations in this direction which lead to poorer beam quality. Among the overall aberrations, the main contributors are two low-order aberrations: astigmatism and defocus. These aberrations will magnify beam divergence angle and degrade beam quality. If the beam divergence angles in both directions are almost zero, the astigmatism and defocus are well corrected. Besides, the output beams of slab lasers are generally in a rectangular aperture with high aspect ratio (normally 1: 10), which need to be reshaped into square in many applications. In this paper, a new method is proposed to correct low-order aberrations and reshape the beams of slab lasers. Three lenses are adapted, one is a spherical lens and the others are cylindrical lenses. These lenses work as a beam shaping system, which converts the beam from rectangular into square and the low-order aberrations are compensated simultaneously. Two wavefront sensors are used to detect input and output beam parameters. The initial size of the beam is 4mmx20mm, and peak to valley (PV) value of the wavefront is several tens of microns. Simulation results show that after correction, the dimension becomes 40mmx40mm, and peak to valley (PV) value of the wavefront is less than 1microns.

Algorithms for Finely Adjusting Etch Depths to Improve the Diffraction Efficiency Uniformity of Large-Aperture Bsg

Finely Control Groove-Depth Variations of Large-Area Diffraction Gratings

Algorithm Optimization and Mask Data Generating for Dammann Gratings in Laser Medical Applications

Chemical Mechanical Polishing to Improve the Efficiency Uniformity of Beam Sampling Grating

Mechanical Polishing to Improve Uniformity of Beam Sampling Grating and Its Effects on Laser-Induced Damage

Calibration of Etching Uniformity for Large Aperture Multilevel Diffractive Optical Element by Ion Beam Etching

Ion beam etching of large aperture diffractive optical elements

Design and Optimization of A Silica Waveguide Based Visible Etched Diffraction Grating with Uniform Loss

Methods for Improving Ion Beam Etching Uniformity of Large-Sized DOEs

Reactive Ion Beam Etching of Large-Aperture Multilayer Diffraction Gratings by Radio Frequency Ion Beam Source

Method for Ion Beam Etching in Angles with Multi-Layers Model

Precise Design of Diffraction Optical Elements Based on Annular Beam Shaping

Methods for increasing the etching uniformity of ion beam multiple mask

Diffraction Efficiency Measurement of Large Aperture Multilayer Dielectric Grating and Its Application in the Fabrication Process

Design of Diffractive Optical Elements for Controllable Axial Long Depth of Focus

A fireworks algorithm based Gerchberg–Saxton algorithm for the design of diffractive optical element for beam shaping

Design and Preparation of Continuous Surface Beam Splitter with High Diffraction Efficiency

The Design, Fabrication and Performance of A Large Area 10000 Line/Mm Metal Transmission Diffraction Gratings for Soft X-Ray

Automatic Low-Order Aberration Correction Based on Geometry Optics: Simulations

Design and Analysis of a Novel Large-Aperture Grating Device and Its Experimental Validation

A New Hybrid Algorithm for Designing the Continuous Phase Screen Used for Beam Shaping