Identification of Modal Parameters for a High-Rise Building Aeroelastic Model

Qian Ding

2008-01-01

Abstract:The effectiveness of three different approaches for identifying the modal parameters of an aeroelatic model,including natural frequencies,natural mode shapes and modal damping ratios,are discussed in this paper by taking a 492 m super high-rise building as an engineering background.The approach of free-decay vibration with an initial excitation in conjunction with analysis(simplified as frequency-domain approach with initial-excitation) was firstly employed for the modal identification of the aeroelastic model.Afterwards,an ambient random vibration test was then carried out in an artificial turbulent wind field in TJ-2 Wind Tunnel.The modal parameters were then extracted from the recorded time-histories of vibration signals by using the approach with ambient wind random excitation and the correlation function-based time-domain STD approach with ambient wind random excitation,respectively.The results show that the natural frequencies and mode shapes identified using the above three approaches were close to each other.The modal damping ratios identified using the approach with initial-excitation are within the empirical range of damping ratio for the aeroelastic model with a cantilever structure of steel spine column.However,the modal damping ratios identified via an ambient wind random excitation test are evidently larger than the empirical value because of the relatively small vibration amplitude.