Abstract:Most existing buildings are not equipped with long-term monitoring system. For the structural model updating and damage detection of this type of structures, ambient vibration test is popular as artificial excitation is not required. This article presents in detail the full-scale ambient vibration test, operational modal analysis, and model updating of a tall building. To capture the dynamic properties of the target 20-story building with limited number of sensors, a 15-setup ambient vibration test was designed to cover at least three measurement points (each consists of a vertical and two orthogonal horizontal measured degrees of freedom) for each selected floor. The modal parameters of each setup were extracted from the measured acceleration signals using a frequency domain decomposition method and were combined to form the global mode shape through the least-squares method. Due to the regularity of the building, a simple class of shear building models was employed to capture the dynamic characteristics of the building under lateral vibration. The identified modal parameters of the building were employed for the model updating of the shear building model to identify the distribution of inter-story stiffness. Since the “amount” of the measured information is small when compared to the “amount” of required information for identifying the uncertain parameters, the model updating problem is unidentifiable. To handle this problem, the Markov chain Monte Carlo–based Bayesian model updating method is employed in this study. The identified modal parameters revealed interesting features about the dynamic properties of the building. The well-matched results between model-predicted and identified modal parameters show the validity of the shear building model in this case study. This study provides valuable experience in the area of structural model updating and structural health monitoring.

Structural dynamic and aerodynamic parameters identification for a tall building with full-scale measurements

Probabilistic assessment of vibration exceedance for a full-scale tall building under typhoon conditions

Analysis of Wind Vibration Characteristics of a Narrow-shaped Steel Residential High-rise Building

Wind-induced Stochastic Response of Controlled Tall Buildings by Complex-Mode Analysis

Practical Analysis of Wind-Induced Human Comfort Condition of Tall Buildings

Identification of Earthquake Ground Motion Based on Limited Acceleration Measurements of Structure Using Kalman Filtering Technique

Investigation of modal parameters of a 600-m-tall skyscraper based on two-year-long structural health monitoring data and five typhoons measurements

Full-scale Measurement and Analysis of K11 Building in Hong Kong During Typhoon

Field Measurement on Translational and Torsional Wind-Induced Response of a High-Rise Building during Typhoon Khanun

Modal parameter identification of tall buildings based on variational mode decomposition and energy separation

Full-Scale Measurements of Translational and Torsional Dynamics Characteristics of a High-Rise Building during Typhoon Sarika

Bayesian model updating of a 20-story office building utilizing operational modal analysis results

Structural modal identification and MCMC-based model updating by a Bayesian approach

Modal identification of Canton Tower using the fast Bayesian FFT method

Dynamic response evaluation on TMD and main tower of Shanghai Tower subjected to Typhoon In‐Fa

Analysis of Non-Stationary Wind Characteristics at an Arch Bridge Using Structural Health Monitoring Data

Monitoring of Wind Effects on a Super-Tall Building under a Typhoon

Full-scale measurements of wind effects and modal parameter identification of Yingxian wooden tower

Effects of Geometric Nonlinearity and Aerodynamic Damping on the Dynamic Structural Response of Tall Buildings: A Case Study

Field Measurements of Wind-Induced Responses of the Shanghai World Financial Center during Super Typhoon Lekima

Parameter Optimization Of Multi-Tmds For Wind-Excited Vibration Suppression Of Tall Buildings