Abstract:In long-span bridges and high-rise buildings, closely spaced modes are commonly observed, which greatly increases the challenge of identifying modal parameters. Hilbert–Huang transform (HHT), a widely used method for modal parameter identification, first applies empirical mode decomposition (EMD) to decompose the acquired response and then uses the Hilbert transform (HT) to identify the modal parameters. However, the problem is that the deficiency of mode separation of EMD in HHT limits its application for structures with closely spaced modes. In this study, an improved HHT based on analytical mode decomposition (AMD) is proposed and is used to identify the modal parameters of structures with closely spaced modes. In the improved HHT, AMD is first employed to replace EMD for decomposing the measured response into several mono-component modes. Then, the random decrement technique is applied to the decomposed mono-component modes to obtain the free decay responses. Furthermore, the resulting free decay responses are analyzed by HT to estimate the modal parameters of structures with closely spaced modes. Examples of a simple three-degree-of-freedom system with closely spaced modes, a high-rise building under ambient excitation, and the Ting Kau bridge under typhoon excitations are adopted to validate the accuracy, effectiveness, and applicability of the proposed method. The results demonstrate that the proposed method can efficiently and accurately identify the natural frequencies and damping ratios of structures with closely spaced modes. Moreover, its identification results are more precise compared to those obtained using existing methods.

Modal parameter identification for engineering structures based on HHT method

Identification method for tensile force in hanger of arch bridges with damper and its application

A Method for Identification of Short Hanger Tension Considering Damper

A Multi-Task Learning-Based Automatic Blind Identification Procedure for Operational Modal Analysis

Damping Parameter Identification Of Large Span Cable-Stayed Bridges

Improvements in the HHT for the Modal Parameter Identification of Structures with Closely Spaced Modes

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

HHT method for system identification and damage detection: an experimental study

Operational Modal Analysis of Civil Engineering Structures with Closely Spaced Modes Based on Improved Hilbert–Huang Transform

Damping identification using weighted fitting of Frequency-response-function (WFF) method

Improved Automatic Operational Modal Analysis Method and Application to Large-Scale Bridges

Automatic Modal Parameter Identification of High Arch Dams: Feasibility Verification

A novel methodology for modal parameter identification of arch dam based on multi-level information fusion

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Operational modal parameter identification of structures for non-stationary ambient excitation

Improvement of H HT in Structural Modal Parameter Identification

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

Modal Parameter Identification of Linear Time Invariant System under Non-stationary Ambient Excitation

Modal parameter identification of Ertan arch dam based on seismic response data

Structural Modal Analysis Based on HHT and Butterworth Filter

Modal Parameter Identification of Ertan Arch Dam from Strong Earthquake Records