Abstract:In the active flight phase, the spacecraft suffers the rigorous external vibration environment which comes from the engine at the bottom of rocket. In course of the ground test, the shaker simulates such excitation through the base movement, and the modal parameters identification method which employs the vibration test data is to the more extent in line with the operating state. In this paper, a specified method is applied for parameter estimation of lumped-mass mechanical system in the vibration test. The modal parameters under the fixed and free–free constrained state can be identified at the same time by this technique. In addition, when the analytical model which includes the test article and the shaking table is adopted, the relations between the response transfer function (RTF) and frequency response function (FRF) are clarified, and some misconceptions in the engineering practice are cleared. Because of the uncertain of the connection impedance between the test article and the shaking table, only the partial parameters of the fixed mode can be identified, such as natural frequency, modal damping ratio and modal shape. As the interface force transfer function (IFTF) can eliminate the influence of the connection impedance and the fixed impedance matrix of the test piece is transformed into the free impedance matrix, the identified parameters of the free mode are complete. Furthermore, the influence of the constraint degree of freedom (DOF) on the parameter identification of the IFTF is discussed preliminarily. Finally, the numerical simulation and the vibration test of discrete structure verify the validity of the proposed method.

Modal Parameter Identification of Linear Time Invariant System under Non-stationary Ambient Excitation

Operational modal parameter identification of structures for non-stationary ambient excitation

DEEP LEARNING-BASED AUTOMATIC BLIND IDENTIFICATION PROCEDURE FOR STRUCTURAL MODAL IDENTIFICATION

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

EMD Method on Identifying Natural Frequency and Damping Ratio of Vibration Mode

Unified Theoretical Model of Natural Excitation Technique(NExT) for Multi-Degree-of-freedom Structural Systems

Nonstationary Seismic Responses of Structure with Nonlinear Stiffness Subject to Modulated Kanai–Tajimi Excitation

Damping identification using weighted fitting of Frequency-response-function (WFF) method

Modal Parameter Identification of a Bridge Under Ambient Excitation

Modal parameter identification for engineering structures based on HHT method

Parameters Identification of Linear Structures Undergoing Ambient Excitation Using Mode Decomposition

Modal Parameter Identification of Structure under Base Excitation Using Vibration Test Data

Model-free Identification of Multiple Periodic Excitations and Detection of Structural Anomaly Using Noisy Response Measurements

Improved Automatic Operational Modal Analysis Method and Application to Large-Scale Bridges

Mode identification by eigensystem realization algorithm through virtual frequency response function

Operating Modal Parameter Identification Under Ambient Excitation

Application of Natural Excitation Technique in the Structures under Time-delay-correlative White Noise Excitations

Quasi-static testing based structural modal parameter estimation

Uncertainty quantification in fast Bayesian modal identification using forced vibration data considering the ambient effect

Modal Parameter Identification Based on Multi-Axis Vibration Environment Test

THE APPLICATION OF THE EXTENDED EIGENSYSTEM REALIZATION ALGORITHM FOR STRUCTURAL MODAL PARAMETER IDENTIFICATION