Abstract:Random sequence adsorption algorithm, Python and ABAQUS joint simulation, preparation and precise prediction of micro mechanical properties of CF/PLA and SIC/PLA composites containing different volume contents of CF particles and SIC particles. At present, it exists the problems of poor computational accuracy of the micromechanical model and insufficient adaptive matching of the RVE unit cell model boundary conditions, being caused by the random distribution of particle size and quantity in particle composite materials. As for the above problems, the paper proposes a micromechanical model that uses a random sequence adsorption algorithm to deeply match and enhance the random distribution of particles, and a subroutine joint simulation method to generate boundary conditions quickly and automatically. The RVE unit cell model of particulate composites are numerically simulated at the micromechanical level. It was found that the enhancement of the mechanical properties of the base material by enhancing particles is highly consistent with the actual improvement value. The simulation values and actual values of particle composite materials with different volume contents are also accurately consistent. In addition, with the increase of particle volume content, its reinforcement effect on the base material first increases and then decreases, and there exists an optimal mixing ratio and a minimum mixing ratio. The optimal mixing ratio for short cut fiber reinforced particles is 50%, with a minimum mixing ratio of 10%. The optimal mixing ratio for silicon carbide reinforced particles is 40%, with a minimum mixing ratio of 8%. Through experimental results, it has been verified that the micromechanical model can quickly and accurately predict the elastic constants and Poisson's ratio of composite materials under periodic displacement boundary conditions, with a prediction accuracy of within 10%. Highlights Effectively solve the problems such as the random distribution of the size and quantity of reinforced particles in the particle composite material and the difficulty in adding the boundary conditions of the micro‐RVE unit cell model in the macro composite material. A random sequence adsorption algorithm is proposed to generate the RVE cell model with reinforced particles, and the periodic displacement boundary conditions are added to the RVE cell model through Python and Abaqus joint simulation. The simulation results show that the stress of chopped fiber reinforced particles is about 1.96 times that of the matrix material, and the stress of SiC reinforced particles is about 2.1 times that of the matrix material, and the optimal mixing ratio of chopped fiber reinforced particles is 50% and that of silicon carbide reinforced particles is 40%. The proposed micromechanical model can accurately predict the elastic constants of composites under periodic boundary conditions, and its prediction accuracy can be controlled within 10%. In this paper, a more reasonable meso‐stress‐strain field of single cell element is given, which can provide reference for studying the meso‐failure mechanism and nonlinear mechanical behavior of particle composites.

Computational Prediction of SiCf/SiC Stiffness and Thermal Residual Stress by 3D Micro-scale FEA Methods

A Virtual Scale Approach to Multi-Scale Calculations and Its Application in Fiber-Reinforced Composites

Machine Learning and Materials Informatics Approaches for Predicting Transverse Mechanical Properties of Unidirectional CFRP Composites with Microvoids

Prediction of the Thermo-Mechanical Properties of the SiCf/SiC RVE Model via FEM and Asymptotic Homogenization Method: Process and Implementation Details

Predictions of elastic property on 2.5D C/SiC composites based on numerical modeling and semi-analytical method

A multiscale modeling for predicting the thermal expansion behaviors of 3D C/SiC composites considering porosity and fiber volume fraction

Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State

Multi-scale modeling and tensile failure prediction of 3D needled C/C-SiC composites considering real microstructure

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Comparison of Test Results and Finite-Element Analysis Using Elastoplastic Modeling of 2.5D C/SiC Composites

Micromechanical FE Analysis of SiCf/SiC Composite with BN Interface

Experimental investigation and multiscale simulation on the bending fatigue of SiCf/SiC composite vanes

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Simulation of failure behavior of 2.5D SiC/SiC variable thickness dovetail joint structures based on mesoscale model

Stochastic Simulation of Thermal Residual Stress in Environmental Barrier Coated 2.5D Woven Ceramic Matrix Composites

Experimental and Numerical Analysis of the Thermal Conductivity of SiCf/SiC Composites

Numerical Simulation of the Mechanical Properties and Fracture of SiCp/6061Al Composite Materials Based on Microstructure

Numerical simulation and experimental study on mesomechanics properties of particulate composites

Thermal Conductivity Prediction of SiC/Silicone Rubber Composites Using Combined Separate Axis Theorem-Finite Element Model

Investigation on A Direct Modeling Strategy for the Effective Elastic Moduli Prediction of Composite Material

3D multiscale tri-level finite element analysis of aluminum matrix composites with Nano&Micro hybrid inclusions