Prediction of the Thermo-Mechanical Properties of the SiCf/SiC RVE Model via FEM and Asymptotic Homogenization Method: Process and Implementation Details

Xiuli Shen,Shuo Zhang,Xin Liu,Longdong Gong,Shaojing Dong
DOI: https://doi.org/10.1007/s11831-020-09488-0
IF: 9.7
2020-09-11
Archives of Computational Methods in Engineering
Abstract:The study focuses on characterizing the thermo-mechanical properties of SiC<sub>f</sub>/SiC using micromechanics finite element method (FEM) and multi-scale thermal–mechanical coupling asymptotic homogenization methods. A multi-scale model of fiber, fiber bundle and 2D woven SiC<sub>f</sub>/SiC has been established, while the predicted properties of the model are verified with the relevant experiments. The detailed steps to realize the micromechanical FEM are discussed, and the improvement methods have been put forward. To provide an optimal process of the micromechanical FEM based on the general software, different boundary and post-processing conditions are used and compared. Based on the traditional homogenization theory, the multi-scale thermal–mechanical coupling asymptotic homogenization method has also been developed to predict the thermo-mechanical properties of the RVE model with introduced realization. To verify the theoretical method, the properties of the 2D woven SiC<sub>f</sub>/SiC were predicted using micromechanics FEM and multi-scale thermal–mechanical coupling method, and the experimental analysis was carried out to compare with the predict results. The two methods exhibit errors in predicting the inter-layer directional performance, while the performance in other directions varies only slightly. The error between the most of the predicted values and experimental measurements is approximately 11%.
computer science, interdisciplinary applications,engineering, multidisciplinary,mathematics
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to predict the thermodynamic properties of SiCf/SiC composites through the finite element method (FEM) and the multi - scale thermo - mechanical coupling asymptotic homogenization method. Specifically, the research focuses on characterizing the thermodynamic properties of SiCf/SiC using the micromechanical finite element method and the multi - scale thermo - mechanical coupling asymptotic homogenization method. To achieve this goal, the author established a multi - scale model including fibers, fiber bundles and 2D braided structures, and verified the performance predicted by the model through relevant experiments. In addition, the paper also discussed in detail the specific steps to implement the micromechanical FEM and proposed improvement methods. By comparing the results under different boundary conditions and post - processing conditions, the optimal micromechanical FEM process based on general - purpose software was provided. Finally, based on the traditional homogenization theory, a multi - scale thermo - mechanical coupling asymptotic homogenization method was developed to predict the thermodynamic properties of the RVE model, and the effectiveness of these theoretical methods was verified through experimental analysis. ### Key issues: 1. **Predicting the thermodynamic properties of SiCf/SiC composites**: - Use the micromechanical finite element method (FEM) and the multi - scale thermo - mechanical coupling asymptotic homogenization method. - Establish a multi - scale model, including fibers, fiber bundles and 2D braided structures. 2. **Verifying the prediction results**: - Verify the performance predicted by the model through experimental data. - Compare the prediction results of different methods (FEM and multi - scale thermo - mechanical coupling asymptotic homogenization method) with the experimental measured values. 3. **Optimizing the FEM process**: - Discuss the specific steps to implement the micromechanical FEM. - Propose improvement methods, especially for applications under different boundary conditions and post - processing conditions. 4. **Development of the multi - scale thermo - mechanical coupling asymptotic homogenization method**: - Develop a new multi - scale thermo - mechanical coupling asymptotic homogenization method based on the traditional homogenization theory. - Describe in detail the implementation process of the method through programming languages and commercial finite element software. ### Main contributions: - **Method improvement**: A best micromechanical FEM process based on general - purpose software was proposed, and the implementation of FEM was optimized by comparing the results under different boundary conditions and post - processing conditions. - **Multi - scale model**: A multi - scale model including fibers, fiber bundles and 2D braided structures was established, which improved the prediction accuracy. - **Experimental verification**: The effectiveness of the theoretical methods was verified through experimental data, especially the prediction results of the multi - scale thermo - mechanical coupling asymptotic homogenization method. ### Conclusions: - There are errors in the two methods when predicting the properties in the inter - layer direction, but the performance differences in other directions are small. - The error between the predicted value and the experimental measured value is approximately 11%. This paper provides a reliable method for predicting the thermodynamic properties of SiCf/SiC composites through detailed theoretical analysis and experimental verification, which has important engineering application value.