Abstract:The development of high performance metal matrix composites (MMCs) requires understanding the complex effects of heterogeneous microstructure on the mechanical properties and failure mechanisms. Experimental observations [1] indicated that fine reinforcement particles increased the composite strengthen and work hardening capacity. A number of dislocation models [1,2] have been proposed in a few decades to predict the particle size dependence. Recently, Gao et al. [3] proposed a mechanism-based theory of strain gradient plasticity (MSG) to illustrate the plastic strain and strain gradient which is dissimilar to the phenomenological strain gradient plasticity theories [4,5]. Gao and Huang [6] developed a Taylor-based nonlocal theory (TNT) of plasticity to account for the size dependence of plastic deformation on the strengthening of particle reinforced composites. Qu et al. [7] have extended the conventional theory of mechanism-based strain gradient plasticity (CMSG) established from the Taylor dislocation model to explain the effect of quench hardening and account for particle/matrix interface debonding via the cohesive zone model (CZM). The numerical results agree well with Lloyd’s experimental data [1]. Nan and Clarke [8] extended the effective medium approach (EMA) to demonstrate the influence of particle size and size distribution as well as particle fracturing on the deformation behavior of MMCs. Tohgo et al. [9] extended the incremental damage model of the MMCs by introducing the particle size effects using Nan–Clarke’s simple method. This paper presents the development of a 2D microstructure based finite element model to investigate the effect of particle size on the deformation behavior of the SiCp/Al composites. In the simulation, the two-dimensional randomly distributed multiparticles unit cell model is used. For modeling the matrix behavior of the composites, the Taylor-based nonlocal theory of plasticity is used. The model is enhanced by including contribution of interfacial decohesion and particle fracture damage mechanisms. The simulation provides the stress–strain field of composites during tensile deformation, and calculates the stress–strain curves of the composites with different particle size. 2. NUMERICAL METHODS

A Thermodynamic Strength Theoretical Model to Explain and Predict Pseudo-Ductility Behavior of SiCf/SiC Composite Material

Experimental and Numerical Investigations of Tensile Properties of SiC Particle‐Reinforced Composites

An analytical model for the high temperature fracture strength of SiC fiber reinforced ceramic matrix composites considering oxidation and residual thermal stresses

Influence of Reinforcement with Multimodal Distribution on Thermophysical Properties and Fracture Behavior in Al-Si/SiC Composites Infiltrated under Super-Gravity Field

A temperature-dependent constitutive model for fiber-reinforced ceramic matrix composites and structural stress analysis

Effect of Particle Strength on SiCp/Al Composite Properties with Network Architecture Design

Micromechanical Modeling Tensile and Fatigue Behavior of Fiber-Reinforced Ceramic-Matrix Composites Considering Matrix Fragmentation and Closure

Hysteresis constitutive model of C/SiC composites considering probabilistic matrix fragmentations

Damage failure mechanism of unidirectional fiber reinforced SiC f /SiC composites under uniaxial tension

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Multi-scale modeling and tensile failure prediction of 3D needled C/C-SiC composites considering real microstructure

Deformation and fracture of SiCp/Al composites under complex loading conditions: A simulation study

The oxide-layer configuration alteration and pseudo-ductile crack propagation mechanisms in composites induced by different relative thicknesses of CVI HfC-SiC multiphase matrix

Evaluating predictive scheme for thermomechanical properties of Si-diamond composites

Micromechanical Analysis of SiC/Ti6Al4V Composite Under Complex Stress State

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

An enhanced fem model on the deformation behavior of sic / aluminum composites

Predictions of elastic property on 2.5D C/SiC composites based on numerical modeling and semi-analytical method

A time-dependent tensile constitutive model for long-fiber-reinforced unidirectional ceramic-matrix minicomposites considering interface and fiber oxidation

A novel micromechanical model for predicting the shear properties of multilayer Ti3C2Tx MXene/carbon fiber fabric/epoxy composite

Fatigue Life Prediction of 2D Woven Ceramic-Matrix Composites at Room and Elevated Temperatures