Abstract:This paper is concerned with predicting the progressive damage and failure of multi-layered hybrid textile composites subjected to uniaxial tensile loading, using a novel two-scale computational mechanics framework. These composites include three-dimensional woven textile composites (3DWTCs) with glass, carbon and Kevlar fibre tows. Progressive damage and failure of 3DWTCs at different length scales are captured in the present model by using a macroscale finite-element (FE) analysis at the representative unit cell (RUC) level, while a closed-form micromechanics analysis is implemented simultaneously at the subscale level using material properties of the constituents (fibre and matrix) as input. The N-layers concentric cylinder (NCYL) model (Zhang and Waas 2014 Acta Mech. 225, 1391-1417; Patel et al. submitted Acta Mech.) to compute local stress, srain and displacement fields in the fibre and matrix is used at the subscale. The 2-CYL fibre-matrix concentric cylinder model is extended to fibre and (N-1) matrix layers, keeping the volume fraction constant, and hence is called the NCYL model where the matrix damage can be captured locally within each discrete layer of the matrix volume. The influence of matrix microdamage at the subscale causes progressive degradation of fibre tow stiffness and matrix stiffness at the macroscale. The global RUC stiffness matrix remains positive definite, until the strain softening response resulting from different failure modes (such as fibre tow breakage, tow splitting in the transverse direction due to matrix cracking inside tow and surrounding matrix tensile failure outside of fibre tows) are initiated. At this stage, the macroscopic post-peak softening response is modelled using the mesh objective smeared crack approach (Rots et al. 1985 HERON 30, 1-48; Heinrich and Waas 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1537). Manufacturing-induced geometric imperfections are included in the simulation, where the FE mesh of the unit cell is generated directly from micro-computed tomography (MCT) real data using a code Simpleware Results from multi-scale analysis for both an idealized perfect geometry and one that includes geometric imperfections are compared with experimental results (Pankow et al. 2012 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, HI, 23-26 April 2012 AIAA 2012-1572). This article is part of the themed issue 'Multiscale modelling of the structural integrity of composite materials'.

Multiscale Numerical Modeling for Thermal Behavior of Plain-Woven Composites with Interfacial and Internal Defects

Progressive failure analysis of 2D woven composites at the meso-micro scale

Multiscale Simulation on the Thermal Response of Woven Composites with Hollow Reinforcements

Effects of general imperfect interface/interphase on the in-plane conductivity of thermal composites

The influence of stochastic interface defects on the effective thermal conductivity of fiber-reinforced composites

Progressive modeling of transverse thermal conductivity of unidirectional natural fiber composites

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Multi-scale modeling: Finite element analysis of the thermophysical properties of carbon/carbon composites considering manufacturing defects and porosity at high temperature

Multiscale modeling and thermal conductivity evaluation of nano-reinforced composite materials with pore defect

Damage and failure modelling of hybrid three-dimensional textile composites: a mesh objective multi-scale approach

Multiscale water diffusivity prediction of plain woven composites considering void defects

Multi-Scale Modeling and Damage Analysis of Composite with Thermal Residual Stress

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

An effective multiscale analysis for the mechanical properties of 3D braided composites considering pore defects

Multiscale Thermomechanical Modeling of Short Fiber-Reinforced Composites

Multiscale Simulation of Damage Progression in 5-Harness Satin Weave Composites

Multi-scale and multi-step modeling of thermal conductivities of 3D braided composites

A unified trans-scale mechanical properties prediction method of 3D composites with void defects

Multiscale viscoelastic behavior of 3D braided composites with pore defects

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach