Abstract:Nb3Sn conductors are important candidates for high-field magnets for particle accelerators, and they continue to be widely used for many laboratory and NMR magnets. However, the critical current density, Jc, of present Nb3Sn conductors declines swiftly above 12-15T. State-of-the-art Ta- and Ti-doped strands exhibit upper critical field, Hc2, values of 24-26.5T (4.2K) and do not reach the FCC target Jc, which serves as the present stretch target for Nb3Sn development. As recently demonstrated, to meet this goal requires enhanced vortex pinning but an independent and supplementary approach is to significantly enhance Hc2. In this study, we have arc-melted multiple Nb alloys with added Hf, Zr, Ta and Ti and drawn them successfully into monofilament wires to investigate the possibilities of Hc2 enhancement through alloying. Hc2(T) was measured for all samples in fields up to 16T and some up to 31T. We have found that all alloys show good agreement with the standard Werthamer, Helfand, and Hohenberg (WHH) fitting procedure without the need to adjust the paramagnetic limitation parameter (alpha) and spin-orbit scattering parameter (lambda_so). The evaluation of dHc2/dT near Tc, which is proportional to the electronic specific heat coefficient (gamma) and the normal state resistivity (rho_n), allows a better understanding of the induced disorder introduced by alloying in the A15 phase. So far, we have observed that Hf alloying of pure Nb can enhance Hc2(0) by 3-4T to 28T, while adding just 1 at. %Hf or Zr into a Nb4Ta base alloy can raise Hc2(0) to 31T. Very importantly we find that Hf and Zr raise the alloy recrystallization temperature above the usual A15 reaction temperature range of 650°C-750°C, thus ensuring denser A15 phase nucleation in the Nb alloy grain boundaries, possibly leading to a more homogeneous A15 phase Sn content and refined A15 grain size. The potential for...

CHARACTERIZATION OF A MULTIFILAMENTARY Nb3Al WIRE FABRICATED BY RAPIDLY HEATING AND RAPIDLY QUENCHING METHOD

Improved critical current density of Cu-doped Nb3Al wire through optimized Rapid-Heating Quenching and Transformation method

Preparation of Nb 3 Al Superconductor by Powder Metallurgy and Effect of Mechanical Alloying on the Phase Formation

Microstructure identification of powder in tube Nb3Al wires during rapid heating process and properties of the transformed superconductors

Reproducible stable critical current density in powder-in-tube (PIT) Nb 3 Al superconductors by multi-time rapid heating and quenching process

Effect of Cu doping on properties of RHQT processed powder in tube Nb3Al wires

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

Crystallization kinetics and magnetic properties of Fe 63.5Co10Si13.5B9Cu 1Nb3 nanocrystalline powder cores

Influence of Fabrication Process on Magnetic Properties of Co-Finemet Nanocrystalline Powder Core

Influence of Nb Alloying on Nb Recrystallization and the Upper Critical Field of Nb3Sn

The Reaction Process of NbAl Interface in Rod-in-Tube Strands

Fabrication and Properties of Multifilamentary MgB2 Wires by In-Situ Powder-in-tube Process

Superconducting property improvement of RHQT Nb3Al wires through doping of Ti

Phase formation and enhanced performance of Nb3Al prepared by spark plasma sintering and subsequent annealing

Introducing nano-scale MgO particles into RHQT Nb 3 Al superconducting wires to significantly improve the critical current density

Fabrication and Superconducting Properties of MgB2 Wires with Amorphous Carbon Doping by In-situ Powder-in-tube Method

Comparative drawability and recrystallization evaluation of Nb4Ta and Nb4Ta1Hf alloys, and the beneficial influence of Hf on developing finer Nb3Sn grain size

THE NUCLEATION PROCESS AND MAGNETIC INTERACTION IN NANOCRYSTALLINE ALLOY ND4FE77CO3B16

Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy

Residual Strain Dependence on Matrix Structure in RHQ-Nb3Al Wires by Neutron Diffraction Measurement

Magnetic and structural behaviours of nanocrystalline Fe 70.8 Nb 3.7 Cu 1 Al 2.7 Mn 0.7 Si 13.5 B 7.6 alloy