The Technology of Powder Coating Pretreatment and Environment Protection

Jun Wang

2000-01-01

Abstract:The technology of powder coating pretreatment and pollution situation is briefly introduced.The ways of clean production in field of powder coating pretreatment and environment protection are discussed.

What problem does this paper attempt to address?

ANALYSIS OF A TECHNOLOGY OF PRETREATMENT FOR POWDER SPRAYING

袁永壮,孙霞

DOI: https://doi.org/10.3969/j.issn.1005-748x.2002.12.013

2002-01-01

Abstract:A technology of pretreatment of coating used in light industry is introduced in detail. According to the characterization of greasy dirt and the mechanism of the formation of phosphorized film, a series of processing steps are added to the traditional technology, which solves the problems of uncleanness of degrease and unevenness of phosphorization. This technology has been widely used in practice.
Development of preparation techniques of TiO2 nanoparticles and designation of new coatings

Ting WANG,Xin JIANG

DOI: https://doi.org/10.3969/j.issn.1006-4184.2007.05.004

2007-01-01

Abstract:This paper systematically introduces the development of preparation techniques of TiO2 nanoparticles and problems in industry application.It is focused on preparation of nano TiO2 by adsorption phase reaction techniques and advantages of new technique.Finally the application of TiO2 nanoparticles in coating is introduced and new development orientation of composite-coatings is presented in this paper.
The Review of Powder Coatings

Du hongyan,Wen Shaoguo,Wang Jihu,Yin Changle,Yu Dayang,Luo Jian,Zhongyan Du,Shaoguo Wen,Jihu Wang,Changle Yin,Dayang Yu,Jian Luo

DOI: https://doi.org/10.4236/msce.2016.43007

2016-01-01

Journal of Materials Science and Chemical Engineering

Abstract:With the environmental regulations becoming more stringent and awareness of consumers increasing to protect environment, an urgent problem is to reduce the use of volatile organic compounds (VOCs). Powder coating is a kind of solid powder coating without any solvent. Due to its excellent application performance and environment-friendly, it is widely used in the field of metal coating, especially appliances of offices and home. In recent years, the use of powder coatings has been developed very fast and the requirements of functional powder coatings are also gradually strengthened. According to resin of the film forming, powder coatings can be divided into two types: thermosetting powder coatings and thermoplastic powder coatings. Each kind of powder coatings has its own advantages and disadvantages, and they will be applied in different fields. In order to improve the properties of powder coatings, there are many reports and studies about them. The compositions of powder coatings were extruded, crushed and screened to gain powder of coating. The powder always was stored at room temperature. The powder coatings often operated by two kinds which were electrostatic spraying method and fluidized bed dipping method. After that, the powder was heated to melt and cure. Finally, a smooth bright permanent film on articles was formed to achieve the purpose of decoration and corrosion. The process flow preparation of powder coatings always separated into dry process production and wet process production. The development courses of powder coatings about resins, pigments and fillers are summarized. The future development trends of powder coatings are illustrated.
Application of Powder Coating in Construction Machinery

WANG Kun-fa,GU Guang-xin,WANG Shuai,KOU Xiang-yang,ZHAO Hong,XIAO Jian,FANG Yao-jing

DOI: https://doi.org/10.3969/j.issn.1007-9548.2013.05.008

2013-01-01

Abstract:With the increasing consciousness of environmental protection,people put forward higher requirements to the construction machinery painting.Powder coating is developed for construction machinery due to its advantages such as low pollution,high painting efficiency and high economic efficiency.In this paper,the feasibility and characteristics in application of powder coating in sheet part,structural part and small part were analyzed and summarized according to the characteristics of construction machinery parts.
RECENT ADVANCE IN TECHNOLOGY OF ANTI-OXIDATION COPPER POWDER

Guo Zhongcheng

Abstract:The progress in treatment of anti-oxidation copper powder is reviewed.The treatments with metal coating,buffer-corrosion agents,coupling agents,reducers and phosphorization,etc are introduced with analysis of advantages and disadvantages.The further research direction is put forward.

Engineering,Materials Science
New Non-Phosphorus Coating Pretreatment Process

FANG Jing-li,FANG Xin

DOI: https://doi.org/10.19289/j.1004-227x.2011.04.020

2011-01-01

Abstract:The environment pollution caused by phosphating pretreatment for coating and restrict measures and new total phosphorus discharge standards promulgated by various countries were reviewed.An introduction is given of the advantages and disadvantages of three new non-phosphorus coating pretreatment processes as alternatives to phosphating,including fluorozirconate (zirconia) pretreatment,silane coupling pretreatment and surface coordination compound film pretreatment on the surface of steel and iron.A detailed discussion is made of the characteristics,process flow,solution compositions,operating conditions as well as solution maintenance of three surface coordination compound film pretreatment processes by use of FPC405 antirust sealing agent prior to electrophoretic coating of iron and steel,FPC406 antirust sealing agent prior to painting of iron and steel,and FPC408 antirust sealing agent prior to powder coating of iron and steel.The three new processes have been used in many factories in China and showed very good results.
Research Status of Preparing Complex Powder Coated with Inorganism

王利剑,郑水林

DOI: https://doi.org/10.3969/j.issn.1008-7524.2005.01.002

2005-01-01

Abstract:The method and principle of preparing complex powder coated with inorganism was introduced and the research status of preparing complex powder coated with inorganism in China was reviewed.
Application of CIP System in Coating Pretreatment

Ning Gu

2003-01-01

Abstract:The conception, fundamentals of CIP system and its application in coating pretreatment were described.
Study on water pollution treatment technology system of printing and dyeing industry in Zhejiang province

Guowang ZHOU,Lu YIN,Fei FANG,Hongjun DAI,Min ZHANG,Wei CHEN,Huixiang SHI

DOI: https://doi.org/10.3969/j.issn.1004-0439.2015.03.001

2015-01-01

Abstract:Facing the increasingly serious situation of water pol ution reduction, it is extremely urgent to improve water pol ution treatment technology of printing and dyeing industry. Based on pol ution source cen?sus of printing and dyeing industry in Zhejiang province in 2011, typical printing and dyeing enterprises were in?vestigated. Major content of water pol ution treatment technology system was proposed on the basis of water pol ution treatment technology′s scientific research achievements and engineering practices.
Powder Coatings for Aluminum Profiles

徐万钧,章晓斌,宋林勇

DOI: https://doi.org/10.3969/j.issn.0253-4312.2002.08.010

2002-01-01

Paint and Coatings Industry

Abstract:This paper has briefly introduced the present development status of powder coatings for architectural aluminum profiles,and indicated the important factors that are essential in designing the powder coatings for aluminum profiles.
Progress of High Performance Polymer Powder Coatings

Guo Qiang

2005-01-01

Abstract:The worldwide progress in the development and application of polymer powder coatings is reviewed.The several research subjects for high performance polymers powder coating are summarized,including developments of the ad- vanced powder coating types such as the climate resistance type,the wear resistance and solid lubricating type and the anti- bacterium type,promotions of the traditional operational properties such as the ornament property and the anti-corrosion prop- erty,and exploitations of the special solidifying technology processes such as the low temperature solidifying,the high rate so- lidifying and the ultraviolet solidifying.The developing tendency of high performance polymer powder coatings is analyzed and discussed.
Environmental impact assessment and enlightenment of surface treatment production line during operation

Lu Kong,Jihua Li

DOI: https://doi.org/10.1007/s11356-021-14664-1

IF: 5.8

2021-06-04

Environmental Science and Pollution Research

Abstract:Industrial production creates material conditions for mankind, but also seriously pollutes the environment. In order to avoid pollution damage to the atmosphere, water, sound, and other environments, environmental impact assessments must be carried out before the project starts, and possible environmental pollution factors must be analyzed and predicted in advance. Company A, a manufacturer of mechanical parts, plans to build a new surface treatment production line, including two production links: anodizing and painting. The product coefficient method and the material balance method were used to evaluate and analyze the environmental pollution factors such as waste gas, wastewater, noise, solid waste, and discarded bath solution discharged during the operation period of the production line. The evaluation results show that after chromium mist recovery, spraying, filtration, and activated carbon adsorption and other measures are concentrated treatment, the concentration of various exhaust gas discharged in an organized manner is lower than the standard limit; various wastewater can be recycled after being filtered by ion exchange resin and activated carbon use, a very small amount of concentrated liquid needs to be handled by an external professional unit, and a cofferdam is installed under the production line and the ground is strengthened to prevent leakage, which will not pollute the groundwater environment; the noise level on the four plant boundaries during the operation of the production line meets the noise standard. No noise pollution will be generated; solid waste and discarded bath solutions are centrally stored by the enterprise and entrusted to an external professional unit for processing, and no other pollution will be generated.

environmental sciences
Status-in-art of Preparation and Production of Ultra-fine Copper Powder in China

Huang Lingyun,Zhu Guocai,Huo Huibin

DOI: https://doi.org/10.14159/j.cnki.0441-3776.2008.05.014

2008-01-01

Chemistry

Abstract:The status-in-art of preparation and production of ultra-fine copper powder including ball mill,plasma,γ-ray irradiation-hydrothermal crystallization,chemical reduction,electrolysis,ultrasound electrolysis,hydrothermal,micro emulsions and collosol method are summarized.The advance of pre-reduction-complex reduction used by Institute of Nuclear and New Energy Technology,Tsinghua University was introduced,too.Furthermore,the present state of copper powder consumption and production in China were also analyzed.Finally,the development of ultra-fine copper powder is prospected.
Preparation of Metal Organic Framework Film on Surface of Aluminum Profile and Properties of Fluorocarbon Powder Coating

Xue-Long Hao,Kai Zhang,Wen Ma,Dong-Hui Zhang,Lu

DOI: https://doi.org/10.1007/s12598-022-02069-z

2022-01-01

Abstract:The chemical pretreatment film on the surface of aluminum profile,the type of fluorocarbon powder and the compati-bility between them are the common key problems in the industry of using"powder"instead of"paint"to solve the volatile organic compounds(VOCs)and related organic wastewater discharge in the coating process.In this study,a new type of pretreatment film was prepared on the surface of aluminum profile.
Pre-treatment for metals

Abstract:3. Procedure for chemical pretreatment The chemical pre-treatment procedure is divided into the following tasks: • Removal of harmful substances such as scale, rust, dust caused by abrasion, greases, oils, dust from the surface. • Creation of a coat that promotes powder adhesion, for example, through phosphating, chromating or chromium-free methods, etc. • Removal of damaging treatment substances from previous process steps by rinsing thoroughly.

Chemistry,Materials Science
Review on the Pretreatment of Substrate for Thermal Spray Process

YANG Zhen-xiao,LIU Min,DENG Chun-ming,DENG Chang-guang,CHE Xiao-zhou

2012-01-01

China surface engineering

Abstract:Pretreatment on substrate was extremely important as a result of the bond strength of mechanical occlusion between coating and substrate.The technical characteristics of currently and widely used grit blasting were reviewed,and the two main drawbacks including grit embedment and damage to substrate for the grit blasting process were pointed out.The effects of grit blasting on high temperature single crystal substrate and ultra high strength steel were discussed.Free grit blasting treatment was recommended for the deposition of HVOF WC coating on relatively soft substrate.Meanwhile,the current research focus on other pretreatment processes on substrate,including high pressure water jet,mechanical roughening and laser treatment was introduced.The principle of the process,process characteristics and their applications in the pretreatment of thermal spray process were emphasized in the introductions to these processes.
The Application of Electrochemical Technology in Printing and Dyeing Wastewater

Yang Shao

2007-01-01

Abstract:The electrochemical technology for the treatment of environmental pollution is studied for the characteristic of high flexibilities,easy control and small amount pollution.In this paper,the essential methods and basic principle of electrochemical technology are mainly introduced including electrochemical deposition,electrochemical oxidation,and reduction, electrochemical adsorption and electrochemical dialysis.The good treatment results were ob- tained with electrochemical in the treatment of printing and dyeing waster.Some problems are indicated in electrode expendable and efficiency.Some factors will be fatherly researched in new electrode and apparatus reactor of electrochemistry technology.
EB-PVD Technology and Development in Preparing Protection Coatings

TENG Min,SUN Yue,HE Xiao-dong,LI Ming-wei

DOI: https://doi.org/10.3969/j.issn.1001-4381.2007.z1.031

2007-01-01

Abstract:The equipment configuration,process and technological characteristics of electron beam physical vapor deposition(EB-PVD) are introduced in this paper.Applied achievements and development in various protection coatings prepared by EB-PVD are recommended.
Clean Production for Batch Galvanizing——An Introduction to Herning Varmforzinkning Galvanizing Plant in Denmark

Rob White

2009-01-01

Abstract:Some advanced technology and practices adopted at Herning Varmforzinkning Galvanizing Plant in Denmark are introduced at details in relation to the overall outline,management of production,energy-saving and consumption reduction,as well as safety and hygiene.This,hopefully,is to provide reference to the domestic personnel in the same filed and promote the development of clean production for batch galvanizing in China.It is pointed out that batch hot-dip galvanizing with effectiveness for antiecrrosion of iron and steel has promising application in industry.However,we are legging behind in this field as compared with the advanced industries in the world,and some processes leading to high energy consump-tion and severe pollution are still in use at home.And clean pro-duction has been widely recognized as the key to the sustainable development of general galvanizing industry in our country along with growing of concern on environmental protection.
Low-pressure Plasma Spraying Technology and Its Research Status

HONG Min,WANG Shan-lin,CHEN Yi,DENG Ying,GUO Zheng-hua,CHEN Wei-min,WU Ji-si,HUANG Yong-de

DOI: https://doi.org/10.3969/j.issn.1674-6457.2020.03.018

2020-01-01

Abstract:As a thermal spraying technology, low-pressure plasma spraying technology can produce a cleaner, denser, and higher bonding strength coating than traditional atmospheric plasma spraying technology and vapor-phase physical deposition. The principle, classification and characteristics of low-pressure plasma spraying were mainly introduced and the generation and development of low-pressure plasma spraying were reviewed. Compared with plasma spraying, ultra-low-pressure plasma spraying and plasma spray deposition, the low-pressure plasma spraying technology was analyzed for its unique advantages in preparing coating. The domestic and foreign research and application of low-pressure plasma spraying technology in the preparation of thermal barrier coatings, fuel cells, solar energy, semiconductors and other fields were further described and the development was prospected. It was also pointed out that the key development direction of low-pressure plasma spraying technology in the future was the in-depth study on the plasma spray flame and the mechanism of the material substrate, as well as the combination with other cutting-edge technologies.

The Technology of Powder Coating Pretreatment and Environment Protection

ANALYSIS OF A TECHNOLOGY OF PRETREATMENT FOR POWDER SPRAYING

Development of preparation techniques of TiO2 nanoparticles and designation of new coatings

The Review of Powder Coatings

Application of Powder Coating in Construction Machinery

RECENT ADVANCE IN TECHNOLOGY OF ANTI-OXIDATION COPPER POWDER

New Non-Phosphorus Coating Pretreatment Process

Research Status of Preparing Complex Powder Coated with Inorganism

Application of CIP System in Coating Pretreatment

Study on water pollution treatment technology system of printing and dyeing industry in Zhejiang province

Powder Coatings for Aluminum Profiles

Progress of High Performance Polymer Powder Coatings

Environmental impact assessment and enlightenment of surface treatment production line during operation

Status-in-art of Preparation and Production of Ultra-fine Copper Powder in China

Preparation of Metal Organic Framework Film on Surface of Aluminum Profile and Properties of Fluorocarbon Powder Coating

Pre-treatment for metals

Review on the Pretreatment of Substrate for Thermal Spray Process

The Application of Electrochemical Technology in Printing and Dyeing Wastewater

EB-PVD Technology and Development in Preparing Protection Coatings

Clean Production for Batch Galvanizing——An Introduction to Herning Varmforzinkning Galvanizing Plant in Denmark

Low-pressure Plasma Spraying Technology and Its Research Status