RECENT ADVANCE IN TECHNOLOGY OF ANTI-OXIDATION COPPER POWDER

Guo Zhongcheng

Abstract:The progress in treatment of anti-oxidation copper powder is reviewed.The treatments with metal coating,buffer-corrosion agents,coupling agents,reducers and phosphorization,etc are introduced with analysis of advantages and disadvantages.The further research direction is put forward.

Engineering,Materials Science

What problem does this paper attempt to address?

Advances on Anti-oxidation Technology of Copper Powder

He Yi-yan

Abstract:The oxidation mechanism of copper powder is reviewed simply. The mechanism and research status of several anti-oxidation technologies of copper powder are introduced emphatically. These technologies are metal plating, organic phosphating, couple agent and reducer treatment,etc.

Chemistry,Materials Science
Development of Surface Anti-oxidation Treatment on Ultrafine Copper Powder

Huang Congxi

Abstract:The development of surface treatment for ultrafine copper powder including coupling agents, organic acids, organic oxidation inhibitors and plating metals are reviewed. The patent technologies such as surface plating oxides、alloying are introduced. And the oxidizing and anti-oxidizing mechanisms are discussed in this paper. At present the emphasis of the surface treatment is mainly around new methods、new techniques and anti-oxidizing mechanism. The long-term validity and the corrosion resistance in high temperature will be the mainly developmental research direction, and alloying may be the best process to solve oxidation resistance ultimately.

Engineering,Chemistry,Materials Science
Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

Xiang LI,Yaqin WU,Gaoqi ZHANG,Yuanyuan ZHU,Bo YANG,Lin ZHANG

DOI: https://doi.org/10.19672/j.cnki.1003-6504.2018.08.007

IF: 11.4

2018-01-01

Environmental Science & Technology

Abstract:High biological toxicity, low reused efficiency, serious pollution, complex treatment process and high treatment cost were the typical characteristics of copper wastewater. The summary revealed advanced progress in treatment and resource utilization of copper containing wastewater. For summarizing features, advantages and disadvantages of various methods, the review analyzed precipitation, adsorption, electrochemistry, wet oxidation-reduction, ion exchange and Fe/C micro electrolysis. It pointed out that the scheme of integration of special combination processes with resource utilization was the key development direction.
A Catalytic Oxidation Approach to Coat Copper Powder with Polyaniline

Yan-hui Guo,Bin-bo Jiang,Ji-zhong Chen,Shi-jie Zhang

DOI: https://doi.org/10.1016/j.surfcoat.2007.06.062

2007-01-01

Abstract:To improve the oxidation resistance of fine copper powder, a new catalytic oxidation method was used to coat copper microparticles with polyaniline. In the method, some copper on the surface of copper particles was converted into Cu2+, and with the catalysis of Cu2+ aniline was oxidized by hydrogen peroxide to form the polyaniline coating layer on copper particles. Detected by field emission scanning electron microscope (FESEM), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD), it is proved that the composite particles have fine core–shell structure, their core are copper particles and their shell are mainly composed of compact polyaniline. The stability of the composites was tested by Thermogravimetric Analyzer (TGA) in nitrogen and in air. It is found that the particulate composite is more stable than copper particles in air.
Anti-oxidation Technique of Conductive Ultrafine Copper Powder

Wang Xuan-jun

Abstract:Oxidized copper powder was coated with an antioxidant which was self-made in the laboratory.The mechanism of the oxides removal from and the coating of the ultrafine oxidized copper power were investigated.IR,XRD and XPS analyses results showed that after pickled with 5% H_2SO_4 and dipped in 0.1%～0.5% anti-oxidant solution at 60℃ for a proper period of time,the surface of the powder was covered with a protective anti-oxidant film which will prevent the surface from environment attach,but don′t affect the conductivity of the powder and the film is stable under 50℃ in 5% H_2SO_4,5%NaOH and 5% NaCl solutions.

Materials Science
A Novel Antioxidation Treatment Method for Micron/Nano Copper Materials in Semiconduct Field

Yu Zhang,C. Cui,Qiang Liu,Ziyuan Chen

DOI: https://doi.org/10.1109/ICEPT50128.2020.9202453

2020-08-01

Abstract:Micro-nano copper powder is the potential interconnect materials of application in the third generation of high-power semiconductor devices, micro-nano copper powder, but easy to be oxidized in the air environment, this feature will seriously affect the widely use of micro nano copper powder and the interconnection reliability after sintering. Therefore, there is an urgent need to find a method that can effectively improve the oxidation resistance and sintering performance of micro-nano copper powder. In this paper, a novel method for the treatment of micro-nano copper powder was proposed, in which the surface oxide of micro-nano copper powder was first rinsed, followed by the addition of imidazole compounds ethanol solution, which was stirred continuously at 60°C for 10 minutes to make the imidazole compounds fully react with micro-nano copper powder. The XRD test of the obtained micro-nano copper powder found that the treated micro-nano copper powder did not appear to oxidize significantly after being left in an air environment for 30 days. After sintering of micro-nano copper powder, the shear test found that the maximum shear strength reached 42.31MPa, which has good shear characteristics.

Engineering,Materials Science
Review on New Process and New Reagent of Copper Oxide

Chi Zhang,Xiao Dong Jia,Ya Lin Lu,Dian Wen Liu,Xiao Lin Zhang

DOI: https://doi.org/10.4028/www.scientific.net/amr.1010-1012.1618

2014-01-01

Advanced Materials Research

Abstract:The paper briefly analyzes and systematically summarizes flotation process and chemical treatment method of low-grade oxidized copper ores in recent years. The new high-efficient collectors and system of reagent combined usage are developed widely and have become an important research direction of oxidized copper ores.
Preparation and characterization of copper powder particles

Yumeng NIU,Yijian LAI,Binyuan ZHAO,Na ZHOU,Qingbiao TAN

DOI: https://doi.org/10.3969/j.issn.1001-9731.2018.05.008

2018-01-01

Abstract:The preparation methods of micro-nano copper powder in the literatures local and overseas are classi-fied and the advantages and disadvantages of different preparation methods are compared in detail.The technical direction of industrialization is pointed out.The main preparation techniques and application characteristics of spherical,dendritic and flaky copper powders are analyzed.The application status and existing problems of cop-per powder in lubrication,catalysis,conductive materials and engineering structural materials are summarized. Aiming at the bottleneck problem of restricting the application of copper powder like reunion and oxidation,it is hoped that the relevant summary will help the selection and research of materials in related fields.
Performance improvement and application of copper-based nanomaterials in membrane technology for water treatment: A review

Shuli Liu,Haoyi Guo,Zhihui Kong,Xiaohong Han,Yatong Gao,Yuhong Zhang,Glen T Daigger,Peng Zhang,Jia Kang,Shuchun Yu,Guoting Li,Gangfu Song

DOI: https://doi.org/10.1016/j.jenvman.2024.122755

Abstract:Membrane fouling, including organic, inorganic, and biological fouling, poses enormous challenges in membrane water treatment. Incorporation of copper-based nanomaterials in polymeric membranes is highly favored due to their exceptional antibacterial properties and capacity to improve membrane hydrophilicity. This review extensively explores the utilization of copper-based nanomaterials in membrane technology for water treatment, with a specific focus on enhancing anti-fouling performance. It elaborates on how copper-based nanomaterials improve the surface properties of membrane materials (such as porosity, hydrophilicity, surface charge, etc.) through physical and chemical processes. It summarizes the properties and potential antibacterial mechanisms of copper-based nanomaterials, primarily by disrupting microbial cell structures through the generation of reactive oxygen species (ROS). Furthermore, recent efforts to enhance the environmental sustainability, cost-effectiveness, and recyclability of copper-based nanomaterials are outlined. The attempts to offer insights for the advancement of anti-fouling practices in water treatment through the use of copper-modified polymer membranes.
Research Progress on Electroless Copper Plating

TIAN Qing-hua,YAN Jian-feng,GUO Xue-yi

DOI: https://doi.org/10.3969/j.issn.1004-227x.2007.04.012

2007-01-01

Abstract:In recent years,the status of electroless copper plating technique is rising constantly in surface treating industry,which is more and more extensive applied in several fields including electronics industry,mechanical industry,aerospace,etc.The investigation on the mechanism of electroless copper plating and process improvement have become one of the most interesting topics.In this paper,the general situation and the recent research progress of electroless copper plating were introduced.Some new advanced technologies were reviewed.The future research directions were presented.
Present Situation of Anti-oxidation Coatings Preparation on Molybdenum and Its Alloys

Rui SONG,Kuaishe WANG,Ping HU,Fan YANG,Boliang HU,Zhitao YU,Jiangfei TAN,Weicheng CAO,Geng AN,Lei GUO

DOI: https://doi.org/10.11896/j.issn.1005-023X.2016.05.013

2016-01-01

Abstract:Molybdenum alloy,as a new generation strategically important rare metal,has been widely used in metallurgy,petroleum,machinery,chemistry,aerospace,nuclear industry and other areas,but the drawback of easy oxidation for Mo and Mo alloys limits their application as structural materials in aerospace fields.The different charac-teristics of oxidation resistant coating materials for Mo and Mo alloys,including intermetallic compound,precious me-tals and heat-resistant alloy coatings,are reviewed.The different preparation methods for the coatings above are sum-marized and then analyzed and compared.Base on these analyses,the article ends on an insight into hteir development trends,problems and current research status.
Preparation and anti-oxidisation resistance of silver-coated copper powders by cobalt-modified copper powders

Fei Han,Mei Cao,Jiali Lin,Ting Liu,Xiaoxin Zhu

DOI: https://doi.org/10.1177/02670836241234020

IF: 1.8

2024-03-05

Materials Science and Technology

Abstract:Spherical copper powders and cobalt-modified copper powders were electroless plated with silver, respectively, to obtain two kinds of silver-plated copper powders. The composite powders were analysed by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy and thermogravimetric-differential scanning calorimetry. Effects of cobalt modification on surface morphology, silver reduction rate, particle size and anti-oxidisation resistance of composite powders were studied. The results indicate that surface morphology of silver-coated copper powders prepared by cobalt-modified copper powders was affected by cobalt, but the size, mass and the percent reduction of silver were significantly increased under the same conditions of electroless plating silver. And silver-coated copper powders prepared by cobalt-modified copper powders have better anti-oxidisation resistance than silver-coated copper powders prepared by copper powders.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Effect of antioxidant-treated copper powder on friction properties of polytetrafluoroethylene

Wei Xiao,Xin Ji

DOI: https://doi.org/10.1007/s13726-021-00903-2

IF: 2.485

2021-02-11

Iranian Polymer Journal

Abstract:Polytetrafluoroethylene (PTFE) has many excellent properties and wide applications, but its low wear resistance limits its use. Copper powder and antioxidants were mixed and composite samples were prepared by high-temperature sintering method to investigate the influence of antioxidants content on friction performance of the composite materials. A friction and wear testing machine was used to test the friction and wear performance, and a scanning electron microscope (SEM) was applied to analyze the composites surface morphology their wear positions. The results showed that antioxidants content greatly influenced the composites tribological wear performance. In the theoretical simulation, ANSYS software was used to simulate the antioxidant content effect on thermal conductivity, friction and wear properties of the composite materials. The simulation data were compared with the experimental results. The theoretical simulation data showed that the model could simulate friction and wear experimental processes accurately. Both results were consistent, which proved the reliability of the theoretical analysis.

polymer science
A Review of Recent Modification, Optimization, and Functionalization Methods for Organic Anticorrosive Coatings

Xingjun Zhang,Yuee Feng,Xingyu Zhang,Gang Li,Zhengfeng Ma,Xingwei Wang

DOI: https://doi.org/10.3390/coatings13122019

IF: 3.236

2023-11-29

Coatings

Abstract:Corrosion problems are widespread in nature. As one of the most convenient and efficient methods for metal anticorrosion protection, anticorrosive coatings have received increasing attention. With the continuous advancement of science and technology, more novel functional anticorrosion coatings are being extensively researched. This review provides an overview of recent research progress in anticorrosion coatings and functionalized modified materials. Recent methods for performance optimization can be categorized into three main sections: modification by nanoparticles, modification by carbon-based materials, and specific functionalization (barrier effect, passivation, shielding effect, resistivity, self-repair). Through modification, the anticorrosion performance of coatings is significantly enhanced, with impedance levels improving by up to three orders of magnitude. Furthermore, modification imparts additional outstanding features to the coatings, such as high-temperature resistance, thermal conductivity, self-healing, and hydrophobicity. Finally, the future development trend of anticorrosion coatings is proposed, and several reasonable suggestions are put forward for the challenges faced.

materials science, multidisciplinary,physics, applied, coatings & films
Status-in-art of Preparation and Production of Ultra-fine Copper Powder in China

Huang Lingyun,Zhu Guocai,Huo Huibin

DOI: https://doi.org/10.14159/j.cnki.0441-3776.2008.05.014

2008-01-01

Chemistry

Abstract:The status-in-art of preparation and production of ultra-fine copper powder including ball mill,plasma,γ-ray irradiation-hydrothermal crystallization,chemical reduction,electrolysis,ultrasound electrolysis,hydrothermal,micro emulsions and collosol method are summarized.The advance of pre-reduction-complex reduction used by Institute of Nuclear and New Energy Technology,Tsinghua University was introduced,too.Furthermore,the present state of copper powder consumption and production in China were also analyzed.Finally,the development of ultra-fine copper powder is prospected.
Method for preparing antioxidated superfine copper powder

王尚军,方晓祖

2008-11-28

Abstract:A preparation method of anti-oxidation superfine copper powder belongs to the powder technical field. The process flow of the method is as follows: taking soluble divalent cupric salt as a starting material for making cupric salt solution, adding and evenly mixing a dispersant and a trace additive, then adding NaOH solution to the cupric salt solution with the NaOH/Cu mol ratio being 2 to cause the Cu to precipitate as Cu(OH)2, adding a hydrazine hydrate as a reducing agent to obtained jelly with the N2H4/Cu mol ratio being 1.5-2.5 and obtaining pure copper powder by two-stage heat preserving reaction: (1) a first stage: preserving at the temperature of 30-50 DEG C, and converting the Cu(OH)2 into Cu2O after reaction; and (2) a second stage: adjusting pH value of the solution with NaOH to 11-13, heating suspending liquid obtained from the first stage to 60-70 DEG C, keeping the temperature until the reaction is finished to obtain the pure copper powder, and then cleaning and drying the copper powder by centrifugal separation. The raw materials used in the method are cheap and available, and the superfine copper powder with the average particle size below 0.5 micron prepared by the method does not need any anti-oxidation treatment, does not discolor after being kept in the air for more than one year, has anti-oxidation temperature of more than 100 DEG C proved by thermogravimetric analysis and is especially suitable for being used as an electronic material.

Materials Science
A Review on the Plasma Electrolytic Oxidation (PEO) Process Applied to Copper and Brass

Arash Fattah-alhosseini,Maryam Molaei,Mosab Kaseem

DOI: https://doi.org/10.1016/j.surfin.2024.104179

IF: 6.2

2024-03-13

Surfaces and Interfaces

Abstract:Copper and its alloys, with their unique characteristics including a low coefficient of thermal expansion, a high melting point, superior thermal and electrical conductivities, outstanding ductility, and commendable resistance to corrosion, are considered highly suitable for applications in power generation, electrical sectors, military operations, and heat exchange pipelines in submarines. Despite its many advantages, the application of copper is somewhat restricted due to its low strength, hardness, and limited resistance to corrosion and wear. However, the plasma electrolytic oxidation (PEO) process, which can generate multifunctional oxides such as CuO, Cu 2 O, and ZnO, offers a promising method for improving the wear and corrosion characteristics of copper-based materials. This paper presents an overview of the latest advancements in the PEO treatment applied to copper and brass. This review offers a comprehensive understanding of the formation of PEO coatings on copper and brass substrates. It explores how the PEO process, its parameters like electrolyte composition, nanoparticle addition, and various post-PEO treatment methods can influence the coatings' morphology, composition, and resistance to corrosion and wear. This review serves as a valuable guide for future research in the field of PEO treatment for copper and its alloys.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
New Technology for Treatment of Electroplating Wastewater and Recovery of Copper Powders

FANG Jing-li,FANG Xin

DOI: https://doi.org/10.16577/j.cnki.42-1215/tb.2010.04.021

2010-01-01

Abstract:A review was provided of the main methods for treatment of electroplating wastewater in China. The use of agent AAT-888 in treatment of Cu- containing waste fluids and wastewater and recovery of Cu, as well as relevant new technology was briefed.
Progress of High Performance Polymer Powder Coatings

Guo Qiang

2005-01-01

Abstract:The worldwide progress in the development and application of polymer powder coatings is reviewed.The several research subjects for high performance polymers powder coating are summarized,including developments of the ad- vanced powder coating types such as the climate resistance type,the wear resistance and solid lubricating type and the anti- bacterium type,promotions of the traditional operational properties such as the ornament property and the anti-corrosion prop- erty,and exploitations of the special solidifying technology processes such as the low temperature solidifying,the high rate so- lidifying and the ultraviolet solidifying.The developing tendency of high performance polymer powder coatings is analyzed and discussed.
The Research Advance of Preparation and Modification of Aluminum Tripolyphosphate

Xizi Xue,Yanan Xue,Xiaoyu Yuan,Heru Zhang,Huiping Sun,Jinku Liu

DOI: https://doi.org/10.3969/j.issn.1009-1696.2018.01.008

2018-01-01

Abstract:Aluminum tripolyphosphate is an excellent anticorrosive pigment,which can effectively inhibit the corrosion of metals. However,the acidity and poor solubility of aluminum tripolyphosphate will reduce its anti-corrosion effect,it usually need to be modified with other substances. In this paper,several preparation methods of aluminum tripolyphosphate were introduced briefly,the anticorrosion performances of aluminum tripolyphosphate modified with oxides,salts,minerals and organics were reviewed,and the development trend of its modifications was prospected.

RECENT ADVANCE IN TECHNOLOGY OF ANTI-OXIDATION COPPER POWDER

Advances on Anti-oxidation Technology of Copper Powder

Development of Surface Anti-oxidation Treatment on Ultrafine Copper Powder

Advanced Progress in Treatment and Resource Utilization of Copper Containing Wastewater

A Catalytic Oxidation Approach to Coat Copper Powder with Polyaniline

Anti-oxidation Technique of Conductive Ultrafine Copper Powder

A Novel Antioxidation Treatment Method for Micron/Nano Copper Materials in Semiconduct Field

Review on New Process and New Reagent of Copper Oxide

Preparation and characterization of copper powder particles

Performance improvement and application of copper-based nanomaterials in membrane technology for water treatment: A review

Research Progress on Electroless Copper Plating

Present Situation of Anti-oxidation Coatings Preparation on Molybdenum and Its Alloys

Preparation and anti-oxidisation resistance of silver-coated copper powders by cobalt-modified copper powders

Effect of antioxidant-treated copper powder on friction properties of polytetrafluoroethylene

A Review of Recent Modification, Optimization, and Functionalization Methods for Organic Anticorrosive Coatings

Status-in-art of Preparation and Production of Ultra-fine Copper Powder in China

Method for preparing antioxidated superfine copper powder

A Review on the Plasma Electrolytic Oxidation (PEO) Process Applied to Copper and Brass

New Technology for Treatment of Electroplating Wastewater and Recovery of Copper Powders

Progress of High Performance Polymer Powder Coatings

The Research Advance of Preparation and Modification of Aluminum Tripolyphosphate