Abstract:The tribochemical reaction of polytetrafluoroethylene (PTFE) resin sliding against a metallic surface was investigated for a purpose of improving its tribological performance. The tribochemical reaction between PTFE and aluminum surface has been investigated experimentally and theoretically [ Onodera et al., J. Phys. Chem. C 2015, 119, 15954−15962 ]. One of the important results is that the wear and self-lubrication properties can be controlled by the catalytic activity of the oxidized aluminum surfaces with different crystal structures (α- and γ-alumina). In particular, the amount of wear was higher on the γ-alumina surface because it easily activates tribochemical degradation of PTFE and suppresses the formation of transfer film (a necessary phenomenon for reducing wear). Accordingly, for controlling catalytic activity a copper surface was tested as a model surface exhibiting a weaker reactivity than an aluminum surface. A thermogravimetric analysis proved that the copper surface showed a weaker catalytic effect in regard to PTFE degradation in comparison with an aluminum surface. Metallic fluoride, causing less transfer film to form, appeared on the aluminum surface but hardly any was observed on the copper surface. An experiment and density functional theory (DFT) calculations showed lower catalytic activity on copper surfaces. A friction test was also carried out to determine the relationship between the catalytic activity of metallic surfaces on PTFE and the resultant wear properties. A rubbed copper surface was fully covered with flakelike PTFE transfer film, and no metallic fluoride was detected. Transfer film was less abundant on an aluminum surface because aluminum fluoride tribochemically formed. Reflecting these chemical changes, the wear amount of PTFE on the copper surface was less than that on the aluminum surface. The results of this investigation indicate that suppressing the catalytic effect during friction process of PTFE is a promising way to improve its tribological performance. The use of a copper-based material will be effective in industrial uses of PTFE, because it suppresses catalytic tribochemical degradation.

Effect of antioxidant-treated copper powder on friction properties of polytetrafluoroethylene

The effects of copper and polytetrafluoroethylene (PTFE) on thermal conductivity and tribological behavior of polyoxymethylene (POM) composites

Tribochemical Degradation of Polytetrafluoroethylene Catalyzed by Copper and Aluminum Surfaces

Effect of Perfluoropolymers on the Anti-Wear Properties of Carbon Fiber/Polyphenylene Sulfide Composites: A Comparative Study

Antifriction and Wear Characteristics of Electrolessly-Deposited Ni–P with PTFE Composites

A Study of the Tribological Behavior of Transfer Films of PTFE Composites Formed under Different Loads, Speeds and Morphologies of the Counterface

The Effects of PTFE Content on Microstructures and Properties of Composite Brushing Plating Coating

Tribological Study of Polytetrafluoroethylene Lubricant Additives Filled with Cu Microparticles or Sio2 Nanoparticles

Effect of Cu content on the microstructure and properties of sintered Fe-0.8C-xCu antifriction materials

The Mechanical and Tribological Properties of Anodic Oxidation Treatment Carbon Fiber-Filled PU Composite

Geometry Effect of Different PTFE Fillers on Self-Lubricating PF Composites: Mechanical and Tribological Properties

Study on friction and wear behavior of copper fibers in semimetallic friction materials

The Effect of PTFE Powder Adhesive Activation on the Wear Resistance of Block PTFE

Effect Of Carbon-Fibre Powder On Friction And Wear Properties Of Copper-Matrix Composites

Study on the Tribological Performance of Copper-Based Powder Metallurgical Friction Materials with Cu-Coated or Uncoated Graphite Particles as Lubricants

Synergistic Enhancement of the High-Temperature Friction and Wear Behavior of PTFE Matrix Composites with the Addition of CF, PEEK, and TiC

Friction and wear of rare-earth modified glass-fiber filled PTFE composites in dry reciprocating sliding motion with impact loads

Effect of homologous molecular crosslinking on the tribological properties of PTFE composites

Synergistic effects of carbon fiber and polytetrafluoroethylene on the friction and wear behavior of polyarylene ether nitrile under dry lubrication condition

Effect of Iron Powder Type on Friction and Wear Properties of Copper-Based Friction Powder Metallurgy Material