Abstract:The purpose of this study is to experimentally and numerically investigate thermal and residual deformations of plastic ball grid array (PBGA) package and assembly. In the experiments, a full-field shadow moire with a sensitivity of 29.2 mum/fringe is used for measuring their real-time out-of- plane deformations (warpages) during heating and cooling conditions. The elastic moduli (Es) and coefficients of thermal expansion (CTEs) for epoxy molding compound (EMC) and organic substrate are measured in terms of temperatures by dynamic mechanical analyzer (DMA) and thermo-mechanical analyzer (TMA), respectively. And a finite element method with the input of these measured material properties is employed to numerically simulate the thermally-induced deformations of them, in order to understand the insight of mechanics. The full-field warpages of the PBGA package and assembly from shadow moire were documented during the temperature cycling (from room temperature to 220degC). It is interesting that the maximum warpages with concave shape for both the package and assembly occur at near 155degC during this thermal cycling, (rather than with convex shape at room temperature by assuming the warpage-free (or stress-free) temperature is at 175degC of molding). This issue has been resolved through the finite element analyses by cooperating with the residual strain (stress) in the EMC of the package, which is obtained by measuring the residual and thermal deformations of the detached EMC/die bi-material structure. This residual strain of the EMC maybe comes either from the chemical shrinkage of the EMC curing, or more possible stress relaxation of the EMC during the first solder reflow of attaching the solder balls. Furthermore, the thermal deformations for both the package and assembly were fully addressed by the finite element models. Both consistent results indicate that the more severe coplanarity with the value of about 275 mum at the corner of the substrate with the size of 40 times 40 times 1.7 mm occurs at near 155degC, due to the Tg and residual strains of the EMC, rather than at the room temperature. This severe coplanarity can be mitigated by lowering the residual shrinkage strain. And the warpage of the PBGA assembly coincides with the package at the temperature beyond 155degC (highly resulting from apparent creep of the solder balls), but is larger than that of the package below 155degC, due to constraint of the PCB through less-pronounced creep solder balls.

An Experimental Study on the Thermal D Eformation in the Metal Base of Packages for Hybrid IC′s

Hybrid Physical Field Simulation: Transient Electro-Thermo-Mechanical Responses Of Interwafer Interconnects Under The Impact Of An Emp

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

Electromagnetic-Thermal Characterization Of On On-Chip Coupled (A)Symmetrical Interconnects

Thermal Performance And Reliability Management For Novel Power Electronic Packaging Using Integrated Base Plate

Thermal Deformation Measurement of Electronic Package Using Advanced Moire Methods

Study of Thermal Deformation of Electronic Package Using Scanning Moire Method with High Resolution Microscopy

Thermal deformation analysis of BGA package by digital image correlation technique

Reliability Research on the Thermal Deformation and Thermal Stress of the Metal Packaging with Low Resistance and High Electric Current

Reliability Research on the Thermal Deformation and Stress of Metal Packaging with Low-Resistance Leads

Advanced Mechanical/Optical Configuration of Real-Time Moiré Interferometry for Thermal Deformation Analysis of Fan-Out Wafer Level Package

Thermally-Induced Deformations and Warpages of Flip-Chip and 2.5D IC Packages Measured by Strain Gauges

Experimental methods for thermomechanical characterization of electronic packages: a review and evaluation

Thermal Deformation Measurement of Electronic Packaging Component Using Afm Scanning Moire Method

A Study On Novel Integrated Base Plate (Ibp) Package For Power Electronics Module

Warpage measurement and simulation of flip-chip PBGA package under thermal loading

Overview of the Experimental Methods for Thermo-mechanical Behavior Characterization of Electronic Packages

Measurements and Modelling of Thermally Induced Warpages of DIMM Socket Server PCB Assembly after Solder Reflow Processes

Thermal Deformation Measurement of the Solder Joints in Electronic Packages Using Electron Moiré Method

Theoretical and Experimental Investigation of Warpage Evolution of Flip Chip Package on Packaging during Fabrication

Comparison between Experimental Measurement and Numerical Analysis of Warpage in PBGA Package and Assembly with the Consideration of Residual Strain in the Molding Compound