Abstract:The purpose of this study is to experimentally and numerically investigate thermal and residual deformations of plastic ball grid array (PBGA) package and assembly. In the experiments, a full-field shadow moire with a sensitivity of 29.2 mum/fringe is used for measuring their real-time out-of- plane deformations (warpages) during heating and cooling conditions. The elastic moduli (Es) and coefficients of thermal expansion (CTEs) for epoxy molding compound (EMC) and organic substrate are measured in terms of temperatures by dynamic mechanical analyzer (DMA) and thermo-mechanical analyzer (TMA), respectively. And a finite element method with the input of these measured material properties is employed to numerically simulate the thermally-induced deformations of them, in order to understand the insight of mechanics. The full-field warpages of the PBGA package and assembly from shadow moire were documented during the temperature cycling (from room temperature to 220degC). It is interesting that the maximum warpages with concave shape for both the package and assembly occur at near 155degC during this thermal cycling, (rather than with convex shape at room temperature by assuming the warpage-free (or stress-free) temperature is at 175degC of molding). This issue has been resolved through the finite element analyses by cooperating with the residual strain (stress) in the EMC of the package, which is obtained by measuring the residual and thermal deformations of the detached EMC/die bi-material structure. This residual strain of the EMC maybe comes either from the chemical shrinkage of the EMC curing, or more possible stress relaxation of the EMC during the first solder reflow of attaching the solder balls. Furthermore, the thermal deformations for both the package and assembly were fully addressed by the finite element models. Both consistent results indicate that the more severe coplanarity with the value of about 275 mum at the corner of the substrate with the size of 40 times 40 times 1.7 mm occurs at near 155degC, due to the Tg and residual strains of the EMC, rather than at the room temperature. This severe coplanarity can be mitigated by lowering the residual shrinkage strain. And the warpage of the PBGA assembly coincides with the package at the temperature beyond 155degC (highly resulting from apparent creep of the solder balls), but is larger than that of the package below 155degC, due to constraint of the PCB through less-pronounced creep solder balls.

Measurements and Modelling of Thermally Induced Warpages of DIMM Socket Server PCB Assembly after Solder Reflow Processes

A Numerical Technique to Evaluate Warpage Behavior of Double Sided Rigid-Flex Board Assemblies during Reflow Soldering Process

Reliability Sensibility Analysis of the PCB Assembly concerning Warpage during the Reflow Soldering Process

Warpage measurement and simulation of flip-chip PBGA package under thermal loading

Comparison between Experimental Measurement and Numerical Analysis of Warpage in PBGA Package and Assembly with the Consideration of Residual Strain in the Molding Compound

Thermally-Induced Deformations and Warpages of Flip-Chip and 2.5D IC Packages Measured by Strain Gauges

Theoretical and Experimental Investigation of Warpage Evolution of Flip Chip Package on Packaging during Fabrication

Characterization of 2.5D package warpage through Shadow Moiré technique and failure analysis

Numerical investigations on the effects of different cooling periods in reflow-soldering process

Stress-induced warpage estimation of advanced semiconductor copper interconnect processes

Simulation methodology development of warpage estimation for epoxy molding compound under considerations of stress relaxation characteristics and curing conditions applied in semiconductor packaging

Thermal Stress Measurement of Solder Joints in Bga Packages: Theoretical and Experimental

Impact of Substrate Materials on Packages Warpage

Temperature prediction for system in package assembly during the reflow soldering process

An investigation of reliability of solder joints in microelectronic packages by high temperature moiré method

Optimization for Warpage and Residual Stress Due to Reflow Process in IGBT Modules Based on Pre-Warped Substrate

An Experimental Study on the Thermal D Eformation in the Metal Base of Packages for Hybrid IC′s

Determination of Smarter Reflow Profile to Achieve a Uniform Temperature Throughout a Board

Effect of solder void on mechanical and thermal properties of flip-chip light-emitting diode: Statistical analysis based on finite element modeling

Thermal Deformation Measurement of the Solder Joints in Electronic Packages Using Electron Moiré Method