Abstract:The 2.5D packaging technology is a high–performance method for electronic packaging. This study addresses the reliability issues of 2.5D packaging during the manufacturing process. A multi–physics field coupling Finite Element Method (FEM) has been developed, combined with sub–modeling techniques, to investigate the curing of underfill adhesive, the curing of Epoxy Molding Compound (EMC), and the reflow soldering between the interposer and substrate in a 2.5D packaging entity during various manufacturing procedures. The focus is on the thermo–mechanical–chemical behavior of viscoelastic components within the packaging structure, as well as the viscoplastic characteristics of the micro solder balls and microbumps. A systematic analysis is conducted on the warpage deformation and stress distribution of the 2.5D packaging at crucial time points. The results demonstrate that after curing, the overall warpage of the packaging exhibits a 'concave' warpage profile. Additionally, as the thickness of the EMC above the chip increases, the warpage value of the packaging also increases. The warpage value defined by linear elasticity is larger than that defined by viscoelasticity. The maximum Von Mises stress value in the key areas of the submodel is greater than the maximum Von Mises stress value in the corresponding key areas of the global model. After reflow soldering, the stress concentration in the micro solder balls occurs at the edge of the micro solder ball array. The maximum stress values for each component of the packaging are observed in the interface areas between the components. Packaging components that undergo the curing process have notably higher warpage and Von Mises stress values than those that do not undergo the curing process. The simulation method established in this study can accurately predict the warpage deformation and stress distribution state of 2.5D packaging, providing significant engineering application value for process optimization and reliability enhancement of 2.5D packaging in the production process.

Experimental methods for thermomechanical characterization of electronic packages: a review and evaluation

Overview of the Experimental Methods for Thermo-mechanical Behavior Characterization of Electronic Packages

An Overview of Current Research Status of Micro-Experimental Mechanics Methodology in Microelectronics Packaging

Actuality and Development of Fatigue Models of Solder Joints in Micro-Electronic Packaging

Computational Analysis of Mechanical and Electromigration Reliability Problems

Thermal stress of MOEMS Accelerometers Based on Grating Interferometric cavity

Reliability Research on the Thermal Deformation and Stress of Metal Packaging with Low-Resistance Leads

Exploring Thermal Interface Materials for Electronics Via Molecular Dynamics Simulations: A Review

Reliability Research on the Thermal Deformation and Thermal Stress of the Metal Packaging with Low Resistance and High Electric Current

Advancements in mechanical characterization techniques and environmental effects on bi-material interfaces in microelectronics: a literature review

Finite element analysis of 2.5D packaging processes based on multi-physics field coupling for predicting the reliability of IC components

Challengeable Mechanical Issues in Microelectronic Packages for Developments

Recent Advances on Thermal Management of Flexible Inorganic Electronics

Thermal Fatigue Failure of Micro-Solder Joints in Electronic Packaging Devices: A Review

Recent advances on thermal analysis of stretchable electronics

Advances on in Situ TEM Mechanical Testing Techniques: a Retrospective and Perspective View

An Experimental Study on the Thermal D Eformation in the Metal Base of Packages for Hybrid IC′s

Theoretical and experimental investigations of transient thermo-mechanical analysis on flexible electronic devices

Study on Package Thermal Stress of Multi-ranged Micro-accelerometer

Thermal Performance And Reliability Management For Novel Power Electronic Packaging Using Integrated Base Plate

Influences of hygrothermal conditions and structure parameters on moisture diffusion behavior in a system‐in‐package module by moisture-thermal-mechanical-coupled finite element modeling