Approach to Stiffen Column Flange and Web in Bolt End-Plate Connections

Gen-Shu Tong

2008-01-01

Abstract:To stiffen the column flange and column web in beam-to-column bolt end-plate connections,an FE analysis using contact elements was carried out to analyze the connections. The bolt backing plate welded onto the inner surface of column flange was studied,and a formula for determining the backing plate thickness was obtained. Calculation results show that the backing plate with proposed thickness can effectively diminish the local deformation of column flange around tensile bolts,and has the same strength and stiffness with the thickened column flange. A new type of diagonal stiffener,which has an offset from the corner of the panel zone (Morris stiffener) and thus has merit of avoiding interfering with bolts,was designed and analyzed. The analysis shows that the Morris stiffener has similar functions with the traditional diagonal stiffener,i.e. reducing the shear deformation of panel zone,increasing the connection stiffness and postponing the web yielding. The bolt backing plate welded upon the inner surface of column flange can replace the thickened column flange,and the panel zone can be stiffened by Morris stiffener.